From 5519d49e6ae0e84fc193535dab91a6902c2a5add Mon Sep 17 00:00:00 2001 From: Matt Strapp Date: Thu, 10 Oct 2024 11:34:42 -0500 Subject: Add more stuff Signed-off-by: Matt Strapp --- dot_config/kitty/kitty.conf | 2456 ++++++++++++++++++++++++++++++++ dot_config/private_htop/private_htoprc | 63 + dot_local/share/powerlevel10k | 2 +- 3 files changed, 2520 insertions(+), 1 deletion(-) create mode 100644 dot_config/kitty/kitty.conf create mode 100644 dot_config/private_htop/private_htoprc diff --git a/dot_config/kitty/kitty.conf b/dot_config/kitty/kitty.conf new file mode 100644 index 0000000..a1cb39b --- /dev/null +++ b/dot_config/kitty/kitty.conf @@ -0,0 +1,2456 @@ +# vim:fileencoding=utf-8:foldmethod=marker + +#: Fonts {{{ + +#: kitty has very powerful font management. You can configure +#: individual font faces and even specify special fonts for particular +#: characters. + +font_family Fira Code Nerd Font Mono +#font_family Terminess Nerd Font Mono + +# font_family monospace +# bold_font auto +# italic_font auto +# bold_italic_font auto + +#: You can specify different fonts for the bold/italic/bold-italic +#: variants. To get a full list of supported fonts use the `kitty +#: +list-fonts` command. By default they are derived automatically, by +#: the OSes font system. When bold_font or bold_italic_font is set to +#: auto on macOS, the priority of bold fonts is semi-bold, bold, +#: heavy. Setting them manually is useful for font families that have +#: many weight variants like Book, Medium, Thick, etc. For example:: + +#: font_family Operator Mono Book +#: bold_font Operator Mono Medium +#: italic_font Operator Mono Book Italic +#: bold_italic_font Operator Mono Medium Italic + +font_size 10.0 + +#: Font size (in pts) + +# force_ltr no + +#: kitty does not support BIDI (bidirectional text), however, for RTL +#: scripts, words are automatically displayed in RTL. That is to say, +#: in an RTL script, the words "HELLO WORLD" display in kitty as +#: "WORLD HELLO", and if you try to select a substring of an RTL- +#: shaped string, you will get the character that would be there had +#: the string been LTR. For example, assuming the Hebrew word ירושלים, +#: selecting the character that on the screen appears to be ם actually +#: writes into the selection buffer the character י. kitty's default +#: behavior is useful in conjunction with a filter to reverse the word +#: order, however, if you wish to manipulate RTL glyphs, it can be +#: very challenging to work with, so this option is provided to turn +#: it off. Furthermore, this option can be used with the command line +#: program GNU FriBidi +#: to get BIDI support, because it will force kitty to always treat +#: the text as LTR, which FriBidi expects for terminals. + +# symbol_map + +#: E.g. symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols + +#: Map the specified Unicode codepoints to a particular font. Useful +#: if you need special rendering for some symbols, such as for +#: Powerline. Avoids the need for patched fonts. Each Unicode code +#: point is specified in the form `U+`. You +#: can specify multiple code points, separated by commas and ranges +#: separated by hyphens. This option can be specified multiple times. +#: The syntax is:: + +#: symbol_map codepoints Font Family Name + +# narrow_symbols + +#: E.g. narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1 + +#: Usually, for Private Use Unicode characters and some symbol/dingbat +#: characters, if the character is followed by one or more spaces, +#: kitty will use those extra cells to render the character larger, if +#: the character in the font has a wide aspect ratio. Using this +#: option you can force kitty to restrict the specified code points to +#: render in the specified number of cells (defaulting to one cell). +#: This option can be specified multiple times. The syntax is:: + +#: narrow_symbols codepoints [optionally the number of cells] + +# disable_ligatures never + +#: Choose how you want to handle multi-character ligatures. The +#: default is to always render them. You can tell kitty to not render +#: them when the cursor is over them by using cursor to make editing +#: easier, or have kitty never render them at all by using always, if +#: you don't like them. The ligature strategy can be set per-window +#: either using the kitty remote control facility or by defining +#: shortcuts for it in kitty.conf, for example:: + +#: map alt+1 disable_ligatures_in active always +#: map alt+2 disable_ligatures_in all never +#: map alt+3 disable_ligatures_in tab cursor + +#: Note that this refers to programming ligatures, typically +#: implemented using the calt OpenType feature. For disabling general +#: ligatures, use the font_features option. + +# font_features + +#: E.g. font_features none + +#: Choose exactly which OpenType features to enable or disable. This +#: is useful as some fonts might have features worthwhile in a +#: terminal. For example, Fira Code includes a discretionary feature, +#: zero, which in that font changes the appearance of the zero (0), to +#: make it more easily distinguishable from Ø. Fira Code also includes +#: other discretionary features known as Stylistic Sets which have the +#: tags ss01 through ss20. + +#: For the exact syntax to use for individual features, see the +#: HarfBuzz documentation . + +#: Note that this code is indexed by PostScript name, and not the font +#: family. This allows you to define very precise feature settings; +#: e.g. you can disable a feature in the italic font but not in the +#: regular font. + +#: On Linux, font features are first read from the FontConfig database +#: and then this option is applied, so they can be configured in a +#: single, central place. + +#: To get the PostScript name for a font, use `kitty +list-fonts +#: --psnames`: + +#: .. code-block:: sh + +#: $ kitty +list-fonts --psnames | grep Fira +#: Fira Code +#: Fira Code Bold (FiraCode-Bold) +#: Fira Code Light (FiraCode-Light) +#: Fira Code Medium (FiraCode-Medium) +#: Fira Code Regular (FiraCode-Regular) +#: Fira Code Retina (FiraCode-Retina) + +#: The part in brackets is the PostScript name. + +#: Enable alternate zero and oldstyle numerals:: + +#: font_features FiraCode-Retina +zero +onum + +#: Enable only alternate zero in the bold font:: + +#: font_features FiraCode-Bold +zero + +#: Disable the normal ligatures, but keep the calt feature which (in +#: this font) breaks up monotony:: + +#: font_features TT2020StyleB-Regular -liga +calt + +#: In conjunction with force_ltr, you may want to disable Arabic +#: shaping entirely, and only look at their isolated forms if they +#: show up in a document. You can do this with e.g.:: + +#: font_features UnifontMedium +isol -medi -fina -init + +# modify_font + +#: Modify font characteristics such as the position or thickness of +#: the underline and strikethrough. The modifications can have the +#: suffix px for pixels or % for percentage of original value. No +#: suffix means use pts. For example:: + +#: modify_font underline_position -2 +#: modify_font underline_thickness 150% +#: modify_font strikethrough_position 2px + +#: Additionally, you can modify the size of the cell in which each +#: font glyph is rendered and the baseline at which the glyph is +#: placed in the cell. For example:: + +#: modify_font cell_width 80% +#: modify_font cell_height -2px +#: modify_font baseline 3 + +#: Note that modifying the baseline will automatically adjust the +#: underline and strikethrough positions by the same amount. +#: Increasing the baseline raises glyphs inside the cell and +#: decreasing it lowers them. Decreasing the cell size might cause +#: rendering artifacts, so use with care. + +# box_drawing_scale 0.001, 1, 1.5, 2 + +#: The sizes of the lines used for the box drawing Unicode characters. +#: These values are in pts. They will be scaled by the monitor DPI to +#: arrive at a pixel value. There must be four values corresponding to +#: thin, normal, thick, and very thick lines. + +# undercurl_style thin-sparse + +#: The style with which undercurls are rendered. This option takes the +#: form (thin|thick)-(sparse|dense). Thin and thick control the +#: thickness of the undercurl. Sparse and dense control how often the +#: curl oscillates. With sparse the curl will peak once per character, +#: with dense twice. + +# text_composition_strategy platform + +#: Control how kitty composites text glyphs onto the background color. +#: The default value of platform tries for text rendering as close to +#: "native" for the platform kitty is running on as possible. + +#: A value of legacy uses the old (pre kitty 0.28) strategy for how +#: glyphs are composited. This will make dark text on light +#: backgrounds look thicker and light text on dark backgrounds +#: thinner. It might also make some text appear like the strokes are +#: uneven. + +#: You can fine tune the actual contrast curve used for glyph +#: composition by specifying up to two space-separated numbers for +#: this setting. + +#: The first number is the gamma adjustment, which controls the +#: thickness of dark text on light backgrounds. Increasing the value +#: will make text appear thicker. The default value for this is 1.0 on +#: Linux and 1.7 on macOS. Valid values are 0.01 and above. The result +#: is scaled based on the luminance difference between the background +#: and the foreground. Dark text on light backgrounds receives the +#: full impact of the curve while light text on dark backgrounds is +#: affected very little. + +#: The second number is an additional multiplicative contrast. It is +#: percentage ranging from 0 to 100. The default value is 0 on Linux +#: and 30 on macOS. + +#: If you wish to achieve similar looking thickness in light and dark +#: themes, a good way to experiment is start by setting the value to +#: 1.0 0 and use a dark theme. Then adjust the second parameter until +#: it looks good. Then switch to a light theme and adjust the first +#: parameter until the perceived thickness matches the dark theme. + +# text_fg_override_threshold 0 + +#: The minimum accepted difference in luminance between the foreground +#: and background color, below which kitty will override the +#: foreground color. It is percentage ranging from 0 to 100. If the +#: difference in luminance of the foreground and background is below +#: this threshold, the foreground color will be set to white if the +#: background is dark or black if the background is light. The default +#: value is 0, which means no overriding is performed. Useful when +#: working with applications that use colors that do not contrast well +#: with your preferred color scheme. + +#: WARNING: Some programs use characters (such as block characters) +#: for graphics display and may expect to be able to set the +#: foreground and background to the same color (or similar colors). +#: If you see unexpected stripes, dots, lines, incorrect color, no +#: color where you expect color, or any kind of graphic display +#: problem try setting text_fg_override_threshold to 0 to see if this +#: is the cause of the problem. + +#: }}} + +#: Cursor customization {{{ + +# cursor #cccccc + +#: Default cursor color. If set to the special value none the cursor +#: will be rendered with a "reverse video" effect. It's color will be +#: the color of the text in the cell it is over and the text will be +#: rendered with the background color of the cell. Note that if the +#: program running in the terminal sets a cursor color, this takes +#: precedence. Also, the cursor colors are modified if the cell +#: background and foreground colors have very low contrast. + +# cursor_text_color #111111 + +#: The color of text under the cursor. If you want it rendered with +#: the background color of the cell underneath instead, use the +#: special keyword: background. Note that if cursor is set to none +#: then this option is ignored. + +# cursor_shape block + +#: The cursor shape can be one of block, beam, underline. Note that +#: when reloading the config this will be changed only if the cursor +#: shape has not been set by the program running in the terminal. This +#: sets the default cursor shape, applications running in the terminal +#: can override it. In particular, shell integration +#: in kitty sets +#: the cursor shape to beam at shell prompts. You can avoid this by +#: setting shell_integration to no-cursor. + +# cursor_beam_thickness 1.5 + +#: The thickness of the beam cursor (in pts). + +# cursor_underline_thickness 2.0 + +#: The thickness of the underline cursor (in pts). + +# cursor_blink_interval -1 + +#: The interval to blink the cursor (in seconds). Set to zero to +#: disable blinking. Negative values mean use system default. Note +#: that the minimum interval will be limited to repaint_delay. + +# cursor_stop_blinking_after 15.0 + +#: Stop blinking cursor after the specified number of seconds of +#: keyboard inactivity. Set to zero to never stop blinking. + +#: }}} + +#: Scrollback {{{ + +# scrollback_lines 2000 + +#: Number of lines of history to keep in memory for scrolling back. +#: Memory is allocated on demand. Negative numbers are (effectively) +#: infinite scrollback. Note that using very large scrollback is not +#: recommended as it can slow down performance of the terminal and +#: also use large amounts of RAM. Instead, consider using +#: scrollback_pager_history_size. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + +#: Program with which to view scrollback in a new window. The +#: scrollback buffer is passed as STDIN to this program. If you change +#: it, make sure the program you use can handle ANSI escape sequences +#: for colors and text formatting. INPUT_LINE_NUMBER in the command +#: line above will be replaced by an integer representing which line +#: should be at the top of the screen. Similarly CURSOR_LINE and +#: CURSOR_COLUMN will be replaced by the current cursor position or +#: set to 0 if there is no cursor, for example, when showing the last +#: command output. + +# scrollback_pager_history_size 0 + +#: Separate scrollback history size (in MB), used only for browsing +#: the scrollback buffer with pager. This separate buffer is not +#: available for interactive scrolling but will be piped to the pager +#: program when viewing scrollback buffer in a separate window. The +#: current implementation stores the data in UTF-8, so approximately +#: 10000 lines per megabyte at 100 chars per line, for pure ASCII, +#: unformatted text. A value of zero or less disables this feature. +#: The maximum allowed size is 4GB. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_fill_enlarged_window no + +#: Fill new space with lines from the scrollback buffer after +#: enlarging a window. + +# wheel_scroll_multiplier 5.0 + +#: Multiplier for the number of lines scrolled by the mouse wheel. +#: Note that this is only used for low precision scrolling devices, +#: not for high precision scrolling devices on platforms such as macOS +#: and Wayland. Use negative numbers to change scroll direction. See +#: also wheel_scroll_min_lines. + +# wheel_scroll_min_lines 1 + +#: The minimum number of lines scrolled by the mouse wheel. The scroll +#: multiplier wheel_scroll_multiplier only takes effect after it +#: reaches this number. Note that this is only used for low precision +#: scrolling devices like wheel mice that scroll by very small amounts +#: when using the wheel. With a negative number, the minimum number of +#: lines will always be added. + +# touch_scroll_multiplier 1.0 + +#: Multiplier for the number of lines scrolled by a touchpad. Note +#: that this is only used for high precision scrolling devices on +#: platforms such as macOS and Wayland. Use negative numbers to change +#: scroll direction. + +#: }}} + +#: Mouse {{{ + +# mouse_hide_wait 3.0 + +#: Hide mouse cursor after the specified number of seconds of the +#: mouse not being used. Set to zero to disable mouse cursor hiding. +#: Set to a negative value to hide the mouse cursor immediately when +#: typing text. Disabled by default on macOS as getting it to work +#: robustly with the ever-changing sea of bugs that is Cocoa is too +#: much effort. + +# url_color #0087bd +# url_style curly + +#: The color and style for highlighting URLs on mouse-over. url_style +#: can be one of: none, straight, double, curly, dotted, dashed. + +# open_url_with default + +#: The program to open clicked URLs. The special value default with +#: first look for any URL handlers defined via the open_actions +#: facility and if non +#: are found, it will use the Operating System's default URL handler +#: (open on macOS and xdg-open on Linux). + +# url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh + +#: The set of URL prefixes to look for when detecting a URL under the +#: mouse cursor. + +# detect_urls yes + +#: Detect URLs under the mouse. Detected URLs are highlighted with an +#: underline and the mouse cursor becomes a hand over them. Even if +#: this option is disabled, URLs are still clickable. See also the +#: underline_hyperlinks option to control how hyperlinks (as opposed +#: to plain text URLs) are displayed. + +# url_excluded_characters + +#: Additional characters to be disallowed from URLs, when detecting +#: URLs under the mouse cursor. By default, all characters that are +#: legal in URLs are allowed. Additionally, newlines are allowed (but +#: stripped). This is to accommodate programs such as mutt that add +#: hard line breaks even for continued lines. \n can be added to this +#: option to disable this behavior. Special characters can be +#: specified using backslash escapes, to specify a backslash use a +#: double backslash. + +# show_hyperlink_targets no + +#: When the mouse hovers over a terminal hyperlink, show the actual +#: URL that will be activated when the hyperlink is clicked. + +# underline_hyperlinks hover + +#: Control how hyperlinks are underlined. They can either be +#: underlined on mouse hover, always (i.e. permanently underlined) or +#: never which means that kitty will not apply any underline styling +#: to hyperlinks. Uses the url_style and url_color settings for the +#: underline style. Note that reloading the config and changing this +#: value to/from always will only affect text subsequently received by +#: kitty. + +# copy_on_select no + +#: Copy to clipboard or a private buffer on select. With this set to +#: clipboard, selecting text with the mouse will cause the text to be +#: copied to clipboard. Useful on platforms such as macOS that do not +#: have the concept of primary selection. You can instead specify a +#: name such as a1 to copy to a private kitty buffer. Map a shortcut +#: with the paste_from_buffer action to paste from this private +#: buffer. For example:: + +#: copy_on_select a1 +#: map shift+cmd+v paste_from_buffer a1 + +#: Note that copying to the clipboard is a security risk, as all +#: programs, including websites open in your browser can read the +#: contents of the system clipboard. + +# paste_actions quote-urls-at-prompt,confirm + +#: A comma separated list of actions to take when pasting text into +#: the terminal. The supported paste actions are: + +#: quote-urls-at-prompt: +#: If the text being pasted is a URL and the cursor is at a shell prompt, +#: automatically quote the URL (needs shell_integration). +#: replace-dangerous-control-codes +#: Replace dangerous control codes from pasted text, without confirmation. +#: replace-newline +#: Replace the newline character from pasted text, without confirmation. +#: confirm: +#: Confirm the paste if the text to be pasted contains any terminal control codes +#: as this can be dangerous, leading to code execution if the shell/program running +#: in the terminal does not properly handle these. +#: confirm-if-large +#: Confirm the paste if it is very large (larger than 16KB) as pasting +#: large amounts of text into shells can be very slow. +#: filter: +#: Run the filter_paste() function from the file paste-actions.py in +#: the kitty config directory on the pasted text. The text returned by the +#: function will be actually pasted. + +# strip_trailing_spaces never + +#: Remove spaces at the end of lines when copying to clipboard. A +#: value of smart will do it when using normal selections, but not +#: rectangle selections. A value of always will always do it. + +# select_by_word_characters @-./_~?&=%+# + +#: Characters considered part of a word when double clicking. In +#: addition to these characters any character that is marked as an +#: alphanumeric character in the Unicode database will be matched. + +# select_by_word_characters_forward + +#: Characters considered part of a word when extending the selection +#: forward on double clicking. In addition to these characters any +#: character that is marked as an alphanumeric character in the +#: Unicode database will be matched. + +#: If empty (default) select_by_word_characters will be used for both +#: directions. + +# click_interval -1.0 + +#: The interval between successive clicks to detect double/triple +#: clicks (in seconds). Negative numbers will use the system default +#: instead, if available, or fallback to 0.5. + +# focus_follows_mouse no + +#: Set the active window to the window under the mouse when moving the +#: mouse around. On macOS, this will also cause the OS Window under +#: the mouse to be focused automatically when the mouse enters it. + +# pointer_shape_when_grabbed arrow + +#: The shape of the mouse pointer when the program running in the +#: terminal grabs the mouse. + +# default_pointer_shape beam + +#: The default shape of the mouse pointer. + +# pointer_shape_when_dragging beam + +#: The default shape of the mouse pointer when dragging across text. + +#: Mouse actions {{{ + +#: Mouse buttons can be mapped to perform arbitrary actions. The +#: syntax is: + +#: .. code-block:: none + +#: mouse_map button-name event-type modes action + +#: Where button-name is one of left, middle, right, b1 ... b8 with +#: added keyboard modifiers. For example: ctrl+shift+left refers to +#: holding the Ctrl+Shift keys while clicking with the left mouse +#: button. The value b1 ... b8 can be used to refer to up to eight +#: buttons on a mouse. + +#: event-type is one of press, release, doublepress, triplepress, +#: click, doubleclick. modes indicates whether the action is performed +#: when the mouse is grabbed by the program running in the terminal, +#: or not. The values are grabbed or ungrabbed or a comma separated +#: combination of them. grabbed refers to when the program running in +#: the terminal has requested mouse events. Note that the click and +#: double click events have a delay of click_interval to disambiguate +#: from double and triple presses. + +#: You can run kitty with the kitty --debug-input command line option +#: to see mouse events. See the builtin actions below to get a sense +#: of what is possible. + +#: If you want to unmap an action, map it to no_op. For example, to +#: disable opening of URLs with a plain click:: + +#: mouse_map left click ungrabbed no_op + +#: See all the mappable actions including mouse actions here +#: . + +#: .. note:: +#: Once a selection is started, releasing the button that started it will +#: automatically end it and no release event will be dispatched. + +# clear_all_mouse_actions no + +#: Remove all mouse action definitions up to this point. Useful, for +#: instance, to remove the default mouse actions. + +#: Click the link under the mouse or move the cursor + +# mouse_map left click ungrabbed mouse_handle_click selection link prompt + +#:: First check for a selection and if one exists do nothing. Then +#:: check for a link under the mouse cursor and if one exists, click +#:: it. Finally check if the click happened at the current shell +#:: prompt and if so, move the cursor to the click location. Note +#:: that this requires shell integration +#:: to work. + +#: Click the link under the mouse or move the cursor even when grabbed + +# mouse_map shift+left click grabbed,ungrabbed mouse_handle_click selection link prompt + +#:: Same as above, except that the action is performed even when the +#:: mouse is grabbed by the program running in the terminal. + +#: Click the link under the mouse cursor + +# mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_handle_click link + +#:: Variant with Ctrl+Shift is present because the simple click based +#:: version has an unavoidable delay of click_interval, to +#:: disambiguate clicks from double clicks. + +#: Discard press event for link click + +# mouse_map ctrl+shift+left press grabbed discard_event + +#:: Prevent this press event from being sent to the program that has +#:: grabbed the mouse, as the corresponding release event is used to +#:: open a URL. + +#: Paste from the primary selection + +# mouse_map middle release ungrabbed paste_from_selection + +#: Start selecting text + +# mouse_map left press ungrabbed mouse_selection normal + +#: Start selecting text in a rectangle + +# mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle + +#: Select a word + +# mouse_map left doublepress ungrabbed mouse_selection word + +#: Select a line + +# mouse_map left triplepress ungrabbed mouse_selection line + +#: Select line from point + +# mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point + +#:: Select from the clicked point to the end of the line. If you +#:: would like to select the word at the point and then extend to the +#:: rest of the line, change line_from_point to +#:: word_and_line_from_point. + +#: Extend the current selection + +# mouse_map right press ungrabbed mouse_selection extend + +#:: If you want only the end of the selection to be moved instead of +#:: the nearest boundary, use move-end instead of extend. + +#: Paste from the primary selection even when grabbed + +# mouse_map shift+middle release ungrabbed,grabbed paste_selection +# mouse_map shift+middle press grabbed discard_event + +#: Start selecting text even when grabbed + +# mouse_map shift+left press ungrabbed,grabbed mouse_selection normal + +#: Start selecting text in a rectangle even when grabbed + +# mouse_map ctrl+shift+alt+left press ungrabbed,grabbed mouse_selection rectangle + +#: Select a word even when grabbed + +# mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word + +#: Select a line even when grabbed + +# mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line + +#: Select line from point even when grabbed + +# mouse_map ctrl+shift+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point + +#:: Select from the clicked point to the end of the line even when +#:: grabbed. If you would like to select the word at the point and +#:: then extend to the rest of the line, change line_from_point to +#:: word_and_line_from_point. + +#: Extend the current selection even when grabbed + +# mouse_map shift+right press ungrabbed,grabbed mouse_selection extend + +#: Show clicked command output in pager + +# mouse_map ctrl+shift+right press ungrabbed mouse_show_command_output + +#:: Requires shell integration +#:: to work. + +#: }}} + +#: }}} + +#: Performance tuning {{{ + +# repaint_delay 10 + +#: Delay between screen updates (in milliseconds). Decreasing it, +#: increases frames-per-second (FPS) at the cost of more CPU usage. +#: The default value yields ~100 FPS which is more than sufficient for +#: most uses. Note that to actually achieve 100 FPS, you have to +#: either set sync_to_monitor to no or use a monitor with a high +#: refresh rate. Also, to minimize latency when there is pending input +#: to be processed, this option is ignored. + +# input_delay 3 + +#: Delay before input from the program running in the terminal is +#: processed (in milliseconds). Note that decreasing it will increase +#: responsiveness, but also increase CPU usage and might cause flicker +#: in full screen programs that redraw the entire screen on each loop, +#: because kitty is so fast that partial screen updates will be drawn. + +# sync_to_monitor yes + +#: Sync screen updates to the refresh rate of the monitor. This +#: prevents screen tearing +#: when scrolling. +#: However, it limits the rendering speed to the refresh rate of your +#: monitor. With a very high speed mouse/high keyboard repeat rate, +#: you may notice some slight input latency. If so, set this to no. + +#: }}} + +#: Terminal bell {{{ + +# enable_audio_bell yes + +#: The audio bell. Useful to disable it in environments that require +#: silence. + +# visual_bell_duration 0.0 + +#: The visual bell duration (in seconds). Flash the screen when a bell +#: occurs for the specified number of seconds. Set to zero to disable. + +# visual_bell_color none + +#: The color used by visual bell. Set to none will fall back to +#: selection background color. If you feel that the visual bell is too +#: bright, you can set it to a darker color. + +# window_alert_on_bell yes + +#: Request window attention on bell. Makes the dock icon bounce on +#: macOS or the taskbar flash on linux. + +# bell_on_tab "🔔 " + +#: Some text or a Unicode symbol to show on the tab if a window in the +#: tab that does not have focus has a bell. If you want to use leading +#: or trailing spaces, surround the text with quotes. See +#: tab_title_template for how this is rendered. + +#: For backwards compatibility, values of yes, y and true are +#: converted to the default bell symbol and no, n, false and none are +#: converted to the empty string. + +# command_on_bell none + +#: Program to run when a bell occurs. The environment variable +#: KITTY_CHILD_CMDLINE can be used to get the program running in the +#: window in which the bell occurred. + +# bell_path none + +#: Path to a sound file to play as the bell sound. If set to none, the +#: system default bell sound is used. Must be in a format supported by +#: the operating systems sound API, such as WAV or OGA on Linux +#: (libcanberra) or AIFF, MP3 or WAV on macOS (NSSound) + +# linux_bell_theme __custom + +#: The XDG Sound Theme kitty will use to play the bell sound. Defaults +#: to the custom theme name used by GNOME and Budgie, falling back to +#: the default freedesktop theme if it does not exist. This option may +#: be removed if Linux ever provides desktop-agnostic support for +#: setting system sound themes. + +#: }}} + +#: Window layout {{{ + +# remember_window_size yes +# initial_window_width 640 +# initial_window_height 400 + +#: If enabled, the OS Window size will be remembered so that new +#: instances of kitty will have the same size as the previous +#: instance. If disabled, the OS Window will initially have size +#: configured by initial_window_width/height, in pixels. You can use a +#: suffix of "c" on the width/height values to have them interpreted +#: as number of cells instead of pixels. + +# enabled_layouts * + +#: The enabled window layouts. A comma separated list of layout names. +#: The special value all means all layouts. The first listed layout +#: will be used as the startup layout. Default configuration is all +#: layouts in alphabetical order. For a list of available layouts, see +#: the layouts . + +# window_resize_step_cells 2 +# window_resize_step_lines 2 + +#: The step size (in units of cell width/cell height) to use when +#: resizing kitty windows in a layout with the shortcut +#: start_resizing_window. The cells value is used for horizontal +#: resizing, and the lines value is used for vertical resizing. + +# window_border_width 0.5pt + +#: The width of window borders. Can be either in pixels (px) or pts +#: (pt). Values in pts will be rounded to the nearest number of pixels +#: based on screen resolution. If not specified, the unit is assumed +#: to be pts. Note that borders are displayed only when more than one +#: window is visible. They are meant to separate multiple windows. + +# draw_minimal_borders yes + +#: Draw only the minimum borders needed. This means that only the +#: borders that separate the window from a neighbor are drawn. Note +#: that setting a non-zero window_margin_width overrides this and +#: causes all borders to be drawn. + +# window_margin_width 0 + +#: The window margin (in pts) (blank area outside the border). A +#: single value sets all four sides. Two values set the vertical and +#: horizontal sides. Three values set top, horizontal and bottom. Four +#: values set top, right, bottom and left. + +# single_window_margin_width -1 + +#: The window margin to use when only a single window is visible (in +#: pts). Negative values will cause the value of window_margin_width +#: to be used instead. A single value sets all four sides. Two values +#: set the vertical and horizontal sides. Three values set top, +#: horizontal and bottom. Four values set top, right, bottom and left. + +# window_padding_width 0 + +#: The window padding (in pts) (blank area between the text and the +#: window border). A single value sets all four sides. Two values set +#: the vertical and horizontal sides. Three values set top, horizontal +#: and bottom. Four values set top, right, bottom and left. + +# single_window_padding_width -1 + +#: The window padding to use when only a single window is visible (in +#: pts). Negative values will cause the value of window_padding_width +#: to be used instead. A single value sets all four sides. Two values +#: set the vertical and horizontal sides. Three values set top, +#: horizontal and bottom. Four values set top, right, bottom and left. + +# placement_strategy center + +#: When the window size is not an exact multiple of the cell size, the +#: cell area of the terminal window will have some extra padding on +#: the sides. You can control how that padding is distributed with +#: this option. Using a value of center means the cell area will be +#: placed centrally. A value of top-left means the padding will be +#: only at the bottom and right edges. + +# active_border_color #00ff00 + +#: The color for the border of the active window. Set this to none to +#: not draw borders around the active window. + +# inactive_border_color #cccccc + +#: The color for the border of inactive windows. + +# bell_border_color #ff5a00 + +#: The color for the border of inactive windows in which a bell has +#: occurred. + +# inactive_text_alpha 1.0 + +#: Fade the text in inactive windows by the specified amount (a number +#: between zero and one, with zero being fully faded). + +# hide_window_decorations no + +#: Hide the window decorations (title-bar and window borders) with +#: yes. On macOS, titlebar-only and titlebar-and-corners can be used +#: to only hide the titlebar and the rounded corners. Whether this +#: works and exactly what effect it has depends on the window +#: manager/operating system. Note that the effects of changing this +#: option when reloading config are undefined. When using titlebar- +#: only, it is useful to also set window_margin_width and +#: placement_strategy to prevent the rounded corners from clipping +#: text. Or use titlebar-and-corners. + +# window_logo_path none + +#: Path to a logo image. Must be in PNG format. Relative paths are +#: interpreted relative to the kitty config directory. The logo is +#: displayed in a corner of every kitty window. The position is +#: controlled by window_logo_position. Individual windows can be +#: configured to have different logos either using the launch action +#: or the remote control facility. + +# window_logo_position bottom-right + +#: Where to position the window logo in the window. The value can be +#: one of: top-left, top, top-right, left, center, right, bottom-left, +#: bottom, bottom-right. + +# window_logo_alpha 0.5 + +#: The amount the logo should be faded into the background. With zero +#: being fully faded and one being fully opaque. + +# resize_debounce_time 0.1 0.5 + +#: The time to wait before redrawing the screen during a live resize +#: of the OS window, when no new resize events have been received, +#: i.e. when resizing is either paused or finished. On platforms such +#: as macOS, where the operating system sends events corresponding to +#: the start and end of a live resize, the second number is used for +#: redraw-after-pause since kitty can distinguish between a pause and +#: end of resizing. On such systems the first number is ignored and +#: redraw is immediate after end of resize. On other systems the +#: first number is used so that kitty is "ready" quickly after the end +#: of resizing, while not also continuously redrawing, to save energy. + +# resize_in_steps no + +#: Resize the OS window in steps as large as the cells, instead of +#: with the usual pixel accuracy. Combined with initial_window_width +#: and initial_window_height in number of cells, this option can be +#: used to keep the margins as small as possible when resizing the OS +#: window. Note that this does not currently work on Wayland. + +# visual_window_select_characters 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ + +#: The list of characters for visual window selection. For example, +#: for selecting a window to focus on with focus_visible_window. The +#: value should be a series of unique numbers or alphabets, case +#: insensitive, from the set 0-9A-Z\-=[];',./\\`. Specify your +#: preference as a string of characters. + +# confirm_os_window_close -1 + +#: Ask for confirmation when closing an OS window or a tab with at +#: least this number of kitty windows in it by window manager (e.g. +#: clicking the window close button or pressing the operating system +#: shortcut to close windows) or by the close_tab action. A value of +#: zero disables confirmation. This confirmation also applies to +#: requests to quit the entire application (all OS windows, via the +#: quit action). Negative values are converted to positive ones, +#: however, with shell_integration enabled, using negative values +#: means windows sitting at a shell prompt are not counted, only +#: windows where some command is currently running. Note that if you +#: want confirmation when closing individual windows, you can map the +#: close_window_with_confirmation action. + +#: }}} + +#: Tab bar {{{ + +# tab_bar_edge bottom + +#: The edge to show the tab bar on, top or bottom. + +# tab_bar_margin_width 0.0 + +#: The margin to the left and right of the tab bar (in pts). + +# tab_bar_margin_height 0.0 0.0 + +#: The margin above and below the tab bar (in pts). The first number +#: is the margin between the edge of the OS Window and the tab bar. +#: The second number is the margin between the tab bar and the +#: contents of the current tab. + +# tab_bar_style fade + +#: The tab bar style, can be one of: + +#: fade +#: Each tab's edges fade into the background color. (See also tab_fade) +#: slant +#: Tabs look like the tabs in a physical file. +#: separator +#: Tabs are separated by a configurable separator. (See also +#: tab_separator) +#: powerline +#: Tabs are shown as a continuous line with "fancy" separators. +#: (See also tab_powerline_style) +#: custom +#: A user-supplied Python function called draw_tab is loaded from the file +#: tab_bar.py in the kitty config directory. For examples of how to +#: write such a function, see the functions named draw_tab_with_* in +#: kitty's source code: kitty/tab_bar.py. See also +#: this discussion +#: for examples from kitty users. +#: hidden +#: The tab bar is hidden. If you use this, you might want to create +#: a mapping for the select_tab action which presents you with a list of +#: tabs and allows for easy switching to a tab. + +# tab_bar_align left + +#: The horizontal alignment of the tab bar, can be one of: left, +#: center, right. + +# tab_bar_min_tabs 2 + +#: The minimum number of tabs that must exist before the tab bar is +#: shown. + +# tab_switch_strategy previous + +#: The algorithm to use when switching to a tab when the current tab +#: is closed. The default of previous will switch to the last used +#: tab. A value of left will switch to the tab to the left of the +#: closed tab. A value of right will switch to the tab to the right of +#: the closed tab. A value of last will switch to the right-most tab. + +# tab_fade 0.25 0.5 0.75 1 + +#: Control how each tab fades into the background when using fade for +#: the tab_bar_style. Each number is an alpha (between zero and one) +#: that controls how much the corresponding cell fades into the +#: background, with zero being no fade and one being full fade. You +#: can change the number of cells used by adding/removing entries to +#: this list. + +# tab_separator " ┇" + +#: The separator between tabs in the tab bar when using separator as +#: the tab_bar_style. + +# tab_powerline_style angled + +#: The powerline separator style between tabs in the tab bar when +#: using powerline as the tab_bar_style, can be one of: angled, +#: slanted, round. + +# tab_activity_symbol none + +#: Some text or a Unicode symbol to show on the tab if a window in the +#: tab that does not have focus has some activity. If you want to use +#: leading or trailing spaces, surround the text with quotes. See +#: tab_title_template for how this is rendered. + +# tab_title_max_length 0 + +#: The maximum number of cells that can be used to render the text in +#: a tab. A value of zero means that no limit is applied. + +# tab_title_template "{fmt.fg.red}{bell_symbol}{activity_symbol}{fmt.fg.tab}{title}" + +#: A template to render the tab title. The default just renders the +#: title with optional symbols for bell and activity. If you wish to +#: include the tab-index as well, use something like: {index}:{title}. +#: Useful if you have shortcuts mapped for goto_tab N. If you prefer +#: to see the index as a superscript, use {sup.index}. All data +#: available is: + +#: title +#: The current tab title. +#: index +#: The tab index usable with goto_tab N goto_tab shortcuts. +#: layout_name +#: The current layout name. +#: num_windows +#: The number of windows in the tab. +#: num_window_groups +#: The number of window groups (a window group is a window and all of its overlay windows) in the tab. +#: tab.active_wd +#: The working directory of the currently active window in the tab +#: (expensive, requires syscall). Use active_oldest_wd to get +#: the directory of the oldest foreground process rather than the newest. +#: tab.active_exe +#: The name of the executable running in the foreground of the currently +#: active window in the tab (expensive, requires syscall). Use +#: active_oldest_exe for the oldest foreground process. +#: max_title_length +#: The maximum title length available. + +#: Note that formatting is done by Python's string formatting +#: machinery, so you can use, for instance, {layout_name[:2].upper()} +#: to show only the first two letters of the layout name, upper-cased. +#: If you want to style the text, you can use styling directives, for +#: example: +#: `{fmt.fg.red}red{fmt.fg.tab}normal{fmt.bg._00FF00}greenbg{fmt.bg.tab}`. +#: Similarly, for bold and italic: +#: `{fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}`. +#: Note that for backward compatibility, if {bell_symbol} or +#: {activity_symbol} are not present in the template, they are +#: prepended to it. + +# active_tab_title_template none + +#: Template to use for active tabs. If not specified falls back to +#: tab_title_template. + +# active_tab_foreground #000 +# active_tab_background #eee +# active_tab_font_style bold-italic +# inactive_tab_foreground #444 +# inactive_tab_background #999 +# inactive_tab_font_style normal + +#: Tab bar colors and styles. + +# tab_bar_background none + +#: Background color for the tab bar. Defaults to using the terminal +#: background color. + +# tab_bar_margin_color none + +#: Color for the tab bar margin area. Defaults to using the terminal +#: background color for margins above and below the tab bar. For side +#: margins the default color is chosen to match the background color +#: of the neighboring tab. + +#: }}} + +#: Color scheme {{{ + +# foreground #dddddd +# background #000000 + +#: The foreground and background colors. + +background_opacity 0.85 + +#: The opacity of the background. A number between zero and one, where +#: one is opaque and zero is fully transparent. This will only work if +#: supported by the OS (for instance, when using a compositor under +#: X11). Note that it only sets the background color's opacity in +#: cells that have the same background color as the default terminal +#: background, so that things like the status bar in vim, powerline +#: prompts, etc. still look good. But it means that if you use a color +#: theme with a background color in your editor, it will not be +#: rendered as transparent. Instead you should change the default +#: background color in your kitty config and not use a background +#: color in the editor color scheme. Or use the escape codes to set +#: the terminals default colors in a shell script to launch your +#: editor. Be aware that using a value less than 1.0 is a (possibly +#: significant) performance hit. When using a low value for this +#: setting, it is desirable that you set the background color to a +#: color the matches the general color of the desktop background, for +#: best text rendering. If you want to dynamically change +#: transparency of windows, set dynamic_background_opacity to yes +#: (this is off by default as it has a performance cost). Changing +#: this option when reloading the config will only work if +#: dynamic_background_opacity was enabled in the original config. + +# background_blur 0 + +#: Set to a positive value to enable background blur (blurring of the +#: visuals behind a transparent window) on platforms that support it. +#: Only takes effect when background_opacity is less than one. On +#: macOS, this will also control the blur radius (amount of blurring). +#: Setting it to too high a value will cause severe performance issues +#: and/or rendering artifacts. Usually, values up to 64 work well. +#: Note that this might cause performance issues, depending on how the +#: platform implements it, so use with care. Currently supported on +#: macOS and KDE under X11. + +# background_image none + +#: Path to a background image. Must be in PNG format. + +# background_image_layout tiled + +#: Whether to tile, scale or clamp the background image. The value can +#: be one of tiled, mirror-tiled, scaled, clamped, centered or +#: cscaled. The scaled and cscaled values scale the image to the +#: window size, with cscaled preserving the image aspect ratio. + +# background_image_linear no + +#: When background image is scaled, whether linear interpolation +#: should be used. + +# dynamic_background_opacity no + +#: Allow changing of the background_opacity dynamically, using either +#: keyboard shortcuts (increase_background_opacity and +#: decrease_background_opacity) or the remote control facility. +#: Changing this option by reloading the config is not supported. + +# background_tint 0.0 + +#: How much to tint the background image by the background color. This +#: option makes it easier to read the text. Tinting is done using the +#: current background color for each window. This option applies only +#: if background_opacity is set and transparent windows are supported +#: or background_image is set. + +# background_tint_gaps 1.0 + +#: How much to tint the background image at the window gaps by the +#: background color, after applying background_tint. Since this is +#: multiplicative with background_tint, it can be used to lighten the +#: tint over the window gaps for a *separated* look. + +# dim_opacity 0.4 + +#: How much to dim text that has the DIM/FAINT attribute set. One +#: means no dimming and zero means fully dimmed (i.e. invisible). + +# selection_foreground #000000 +# selection_background #fffacd + +#: The foreground and background colors for text selected with the +#: mouse. Setting both of these to none will cause a "reverse video" +#: effect for selections, where the selection will be the cell text +#: color and the text will become the cell background color. Setting +#: only selection_foreground to none will cause the foreground color +#: to be used unchanged. Note that these colors can be overridden by +#: the program running in the terminal. + +#: The color table {{{ + +#: The 256 terminal colors. There are 8 basic colors, each color has a +#: dull and bright version, for the first 16 colors. You can set the +#: remaining 240 colors as color16 to color255. + +# color0 #000000 +# color8 #767676 + +#: black + +# color1 #cc0403 +# color9 #f2201f + +#: red + +# color2 #19cb00 +# color10 #23fd00 + +#: green + +# color3 #cecb00 +# color11 #fffd00 + +#: yellow + +# color4 #0d73cc +# color12 #1a8fff + +#: blue + +# color5 #cb1ed1 +# color13 #fd28ff + +#: magenta + +# color6 #0dcdcd +# color14 #14ffff + +#: cyan + +# color7 #dddddd +# color15 #ffffff + +#: white + +# mark1_foreground black + +#: Color for marks of type 1 + +# mark1_background #98d3cb + +#: Color for marks of type 1 (light steel blue) + +# mark2_foreground black + +#: Color for marks of type 2 + +# mark2_background #f2dcd3 + +#: Color for marks of type 1 (beige) + +# mark3_foreground black + +#: Color for marks of type 3 + +# mark3_background #f274bc + +#: Color for marks of type 3 (violet) + +#: }}} + +#: }}} + +#: Advanced {{{ + +# shell . + +#: The shell program to execute. The default value of . means to use +#: whatever shell is set as the default shell for the current user. +#: Note that on macOS if you change this, you might need to add +#: --login and --interactive to ensure that the shell starts in +#: interactive mode and reads its startup rc files. Environment +#: variables are expanded in this setting. + +# editor . + +#: The terminal based text editor (such as vim or nano) to use when +#: editing the kitty config file or similar tasks. + +#: The default value of . means to use the environment variables +#: VISUAL and EDITOR in that order. If these variables aren't set, +#: kitty will run your shell ($SHELL -l -i -c env) to see if your +#: shell startup rc files set VISUAL or EDITOR. If that doesn't work, +#: kitty will cycle through various known editors (vim, emacs, etc.) +#: and take the first one that exists on your system. + +# close_on_child_death no + +#: Close the window when the child process (shell) exits. With the +#: default value no, the terminal will remain open when the child +#: exits as long as there are still processes outputting to the +#: terminal (for example disowned or backgrounded processes). When +#: enabled with yes, the window will close as soon as the child +#: process exits. Note that setting it to yes means that any +#: background processes still using the terminal can fail silently +#: because their stdout/stderr/stdin no longer work. + +# remote_control_password + +#: Allow other programs to control kitty using passwords. This option +#: can be specified multiple times to add multiple passwords. If no +#: passwords are present kitty will ask the user for permission if a +#: program tries to use remote control with a password. A password can +#: also *optionally* be associated with a set of allowed remote +#: control actions. For example:: + +#: remote_control_password "my passphrase" get-colors set-colors focus-window focus-tab + +#: Only the specified actions will be allowed when using this +#: password. Glob patterns can be used too, for example:: + +#: remote_control_password "my passphrase" set-tab-* resize-* + +#: To get a list of available actions, run:: + +#: kitten @ --help + +#: A set of actions to be allowed when no password is sent can be +#: specified by using an empty password. For example:: + +#: remote_control_password "" *-colors + +#: Finally, the path to a python module can be specified that provides +#: a function is_cmd_allowed that is used to check every remote +#: control command. For example:: + +#: remote_control_password "my passphrase" my_rc_command_checker.py + +#: Relative paths are resolved from the kitty configuration directory. +#: See rc_custom_auth for details. + +# allow_remote_control no + +#: Allow other programs to control kitty. If you turn this on, other +#: programs can control all aspects of kitty, including sending text +#: to kitty windows, opening new windows, closing windows, reading the +#: content of windows, etc. Note that this even works over SSH +#: connections. The default setting of no prevents any form of remote +#: control. The meaning of the various values are: + +#: password +#: Remote control requests received over both the TTY device and the socket +#: are confirmed based on passwords, see remote_control_password. + +#: socket-only +#: Remote control requests received over a socket are accepted +#: unconditionally. Requests received over the TTY are denied. +#: See listen_on. + +#: socket +#: Remote control requests received over a socket are accepted +#: unconditionally. Requests received over the TTY are confirmed based on +#: password. + +#: no +#: Remote control is completely disabled. + +#: yes +#: Remote control requests are always accepted. + +# listen_on none + +#: Listen to the specified socket for remote control connections. Note +#: that this will apply to all kitty instances. It can be overridden +#: by the kitty --listen-on command line option. For UNIX sockets, +#: such as unix:${TEMP}/mykitty or unix:@mykitty (on Linux). +#: Environment variables are expanded and relative paths are resolved +#: with respect to the temporary directory. If {kitty_pid} is present, +#: then it is replaced by the PID of the kitty process, otherwise the +#: PID of the kitty process is appended to the value, with a hyphen. +#: For TCP sockets such as tcp:localhost:0 a random port is always +#: used even if a non-zero port number is specified. See the help for +#: kitty --listen-on for more details. Note that this will be ignored +#: unless allow_remote_control is set to either: yes, socket or +#: socket-only. Changing this option by reloading the config is not +#: supported. + +# env + +#: Specify the environment variables to be set in all child processes. +#: Using the name with an equal sign (e.g. env VAR=) will set it to +#: the empty string. Specifying only the name (e.g. env VAR) will +#: remove the variable from the child process' environment. Note that +#: environment variables are expanded recursively, for example:: + +#: env VAR1=a +#: env VAR2=${HOME}/${VAR1}/b + +#: The value of VAR2 will be /a/b. + +# watcher + +#: Path to python file which will be loaded for watchers +#: . Can be +#: specified more than once to load multiple watchers. The watchers +#: will be added to every kitty window. Relative paths are resolved +#: relative to the kitty config directory. Note that reloading the +#: config will only affect windows created after the reload. + +# exe_search_path + +#: Control where kitty finds the programs to run. The default search +#: order is: First search the system wide PATH, then ~/.local/bin and +#: ~/bin. If still not found, the PATH defined in the login shell +#: after sourcing all its startup files is tried. Finally, if present, +#: the PATH specified by the env option is tried. + +#: This option allows you to prepend, append, or remove paths from +#: this search order. It can be specified multiple times for multiple +#: paths. A simple path will be prepended to the search order. A path +#: that starts with the + sign will be append to the search order, +#: after ~/bin above. A path that starts with the - sign will be +#: removed from the entire search order. For example:: + +#: exe_search_path /some/prepended/path +#: exe_search_path +/some/appended/path +#: exe_search_path -/some/excluded/path + +# update_check_interval 24 + +#: The interval to periodically check if an update to kitty is +#: available (in hours). If an update is found, a system notification +#: is displayed informing you of the available update. The default is +#: to check every 24 hours, set to zero to disable. Update checking is +#: only done by the official binary builds. Distro packages or source +#: builds do not do update checking. Changing this option by reloading +#: the config is not supported. + +# startup_session none + +#: Path to a session file to use for all kitty instances. Can be +#: overridden by using the kitty --session =none command line option +#: for individual instances. See sessions +#: in the kitty +#: documentation for details. Note that relative paths are interpreted +#: with respect to the kitty config directory. Environment variables +#: in the path are expanded. Changing this option by reloading the +#: config is not supported. + +# clipboard_control write-clipboard write-primary read-clipboard-ask read-primary-ask + +#: Allow programs running in kitty to read and write from the +#: clipboard. You can control exactly which actions are allowed. The +#: possible actions are: write-clipboard, read-clipboard, write- +#: primary, read-primary, read-clipboard-ask, read-primary-ask. The +#: default is to allow writing to the clipboard and primary selection +#: and to ask for permission when a program tries to read from the +#: clipboard. Note that disabling the read confirmation is a security +#: risk as it means that any program, even the ones running on a +#: remote server via SSH can read your clipboard. See also +#: clipboard_max_size. + +# clipboard_max_size 512 + +#: The maximum size (in MB) of data from programs running in kitty +#: that will be stored for writing to the system clipboard. A value of +#: zero means no size limit is applied. See also clipboard_control. + +# file_transfer_confirmation_bypass + +#: The password that can be supplied to the file transfer kitten +#: to skip the +#: transfer confirmation prompt. This should only be used when +#: initiating transfers from trusted computers, over trusted networks +#: or encrypted transports, as it allows any programs running on the +#: remote machine to read/write to the local filesystem, without +#: permission. + +# allow_hyperlinks yes + +#: Process hyperlink escape sequences (OSC 8). If disabled OSC 8 +#: escape sequences are ignored. Otherwise they become clickable +#: links, that you can click with the mouse or by using the hints +#: kitten . The +#: special value of ask means that kitty will ask before opening the +#: link when clicked. + +# shell_integration enabled + +#: Enable shell integration on supported shells. This enables features +#: such as jumping to previous prompts, browsing the output of the +#: previous command in a pager, etc. on supported shells. Set to +#: disabled to turn off shell integration, completely. It is also +#: possible to disable individual features, set to a space separated +#: list of these values: no-rc, no-cursor, no-title, no-cwd, no- +#: prompt-mark, no-complete, no-sudo. See Shell integration +#: for details. + +# allow_cloning ask + +#: Control whether programs running in the terminal can request new +#: windows to be created. The canonical example is clone-in-kitty +#: . +#: By default, kitty will ask for permission for each clone request. +#: Allowing cloning unconditionally gives programs running in the +#: terminal (including over SSH) permission to execute arbitrary code, +#: as the user who is running the terminal, on the computer that the +#: terminal is running on. + +# clone_source_strategies venv,conda,env_var,path + +#: Control what shell code is sourced when running clone-in-kitty in +#: the newly cloned window. The supported strategies are: + +#: venv +#: Source the file $VIRTUAL_ENV/bin/activate. This is used by the +#: Python stdlib venv module and allows cloning venvs automatically. +#: conda +#: Run conda activate $CONDA_DEFAULT_ENV. This supports the virtual +#: environments created by conda. +#: env_var +#: Execute the contents of the environment variable +#: KITTY_CLONE_SOURCE_CODE with eval. +#: path +#: Source the file pointed to by the environment variable +#: KITTY_CLONE_SOURCE_PATH. + +#: This option must be a comma separated list of the above values. +#: Only the first valid match, in the order specified, is sourced. + +# term xterm-kitty + +#: The value of the TERM environment variable to set. Changing this +#: can break many terminal programs, only change it if you know what +#: you are doing, not because you read some advice on "Stack Overflow" +#: to change it. The TERM variable is used by various programs to get +#: information about the capabilities and behavior of the terminal. If +#: you change it, depending on what programs you run, and how +#: different the terminal you are changing it to is, various things +#: from key-presses, to colors, to various advanced features may not +#: work. Changing this option by reloading the config will only affect +#: newly created windows. + +# forward_stdio no + +#: Forward STDOUT and STDERR of the kitty process to child processes +#: as file descriptors 3 and 4. This is useful for debugging as it +#: allows child processes to print to kitty's STDOUT directly. For +#: example, echo hello world >&3 in a shell will print to the parent +#: kitty's STDOUT. When enabled, this also sets the +#: KITTY_STDIO_FORWARDED=3 environment variable so child processes +#: know about the forwarding. + +# menu_map + +#: Specify entries for various menus in kitty. Currently only the +#: global menubar on macOS is supported. For example:: + +#: menu_map global "Actions::Launch something special" launch --hold --type=os-window sh -c "echo hello world" + +#: This will create a menu entry named "Launch something special" in +#: an "Actions" menu in the macOS global menubar. Sub-menus can be +#: created by adding more levels separated by ::. + +#: }}} + +#: OS specific tweaks {{{ + +# wayland_titlebar_color system + +#: The color of the kitty window's titlebar on Wayland systems with +#: client side window decorations such as GNOME. A value of system +#: means to use the default system color, a value of background means +#: to use the background color of the currently active window and +#: finally you can use an arbitrary color, such as #12af59 or red. + +# macos_titlebar_color system + +#: The color of the kitty window's titlebar on macOS. A value of +#: system means to use the default system color, light or dark can +#: also be used to set it explicitly. A value of background means to +#: use the background color of the currently active window and finally +#: you can use an arbitrary color, such as #12af59 or red. WARNING: +#: This option works by using a hack when arbitrary color (or +#: background) is configured, as there is no proper Cocoa API for it. +#: It sets the background color of the entire window and makes the +#: titlebar transparent. As such it is incompatible with +#: background_opacity. If you want to use both, you are probably +#: better off just hiding the titlebar with hide_window_decorations. + +# macos_option_as_alt no + +#: Use the Option key as an Alt key on macOS. With this set to no, +#: kitty will use the macOS native Option+Key to enter Unicode +#: character behavior. This will break any Alt+Key keyboard shortcuts +#: in your terminal programs, but you can use the macOS Unicode input +#: technique. You can use the values: left, right or both to use only +#: the left, right or both Option keys as Alt, instead. Note that +#: kitty itself always treats Option the same as Alt. This means you +#: cannot use this option to configure different kitty shortcuts for +#: Option+Key vs. Alt+Key. Also, any kitty shortcuts using +#: Option/Alt+Key will take priority, so that any such key presses +#: will not be passed to terminal programs running inside kitty. +#: Changing this option by reloading the config is not supported. + +# macos_hide_from_tasks no + +#: Hide the kitty window from running tasks on macOS (⌘+Tab and the +#: Dock). Changing this option by reloading the config is not +#: supported. + +# macos_quit_when_last_window_closed no + +#: Have kitty quit when all the top-level windows are closed on macOS. +#: By default, kitty will stay running, even with no open windows, as +#: is the expected behavior on macOS. + +# macos_window_resizable yes + +#: Disable this if you want kitty top-level OS windows to not be +#: resizable on macOS. + +# macos_thicken_font 0 + +#: Draw an extra border around the font with the given width, to +#: increase legibility at small font sizes on macOS. For example, a +#: value of 0.75 will result in rendering that looks similar to sub- +#: pixel antialiasing at common font sizes. Note that in modern kitty, +#: this option is obsolete (although still supported). Consider using +#: text_composition_strategy instead. + +# macos_traditional_fullscreen no + +#: Use the macOS traditional full-screen transition, that is faster, +#: but less pretty. + +# macos_show_window_title_in all + +#: Control where the window title is displayed on macOS. A value of +#: window will show the title of the currently active window at the +#: top of the macOS window. A value of menubar will show the title of +#: the currently active window in the macOS global menu bar, making +#: use of otherwise wasted space. A value of all will show the title +#: in both places, and none hides the title. See +#: macos_menubar_title_max_length for how to control the length of the +#: title in the menu bar. + +# macos_menubar_title_max_length 0 + +#: The maximum number of characters from the window title to show in +#: the macOS global menu bar. Values less than one means that there is +#: no maximum limit. + +# macos_custom_beam_cursor no + +#: Use a custom mouse cursor for macOS that is easier to see on both +#: light and dark backgrounds. Nowadays, the default macOS cursor +#: already comes with a white border. WARNING: this might make your +#: mouse cursor invisible on dual GPU machines. Changing this option +#: by reloading the config is not supported. + +# macos_colorspace srgb + +#: The colorspace in which to interpret terminal colors. The default +#: of srgb will cause colors to match those seen in web browsers. The +#: value of default will use whatever the native colorspace of the +#: display is. The value of displayp3 will use Apple's special +#: snowflake display P3 color space, which will result in over +#: saturated (brighter) colors with some color shift. Reloading +#: configuration will change this value only for newly created OS +#: windows. + +# linux_display_server auto + +#: Choose between Wayland and X11 backends. By default, an appropriate +#: backend based on the system state is chosen automatically. Set it +#: to x11 or wayland to force the choice. Changing this option by +#: reloading the config is not supported. + +#: }}} + +#: Keyboard shortcuts {{{ + +#: Keys are identified simply by their lowercase Unicode characters. +#: For example: a for the A key, [ for the left square bracket key, +#: etc. For functional keys, such as Enter or Escape, the names are +#: present at Functional key definitions +#: . +#: For modifier keys, the names are ctrl (control, ⌃), shift (⇧), alt +#: (opt, option, ⌥), super (cmd, command, ⌘). See also: GLFW mods +#: + +#: On Linux you can also use XKB key names to bind keys that are not +#: supported by GLFW. See XKB keys +#: for a list of key names. The name to use is the part +#: after the XKB_KEY_ prefix. Note that you can only use an XKB key +#: name for keys that are not known as GLFW keys. + +#: Finally, you can use raw system key codes to map keys, again only +#: for keys that are not known as GLFW keys. To see the system key +#: code for a key, start kitty with the kitty --debug-input option, +#: kitty will output some debug text for every key event. In that text +#: look for native_code, the value of that becomes the key name in the +#: shortcut. For example: + +#: .. code-block:: none + +#: on_key_input: glfw key: 0x61 native_code: 0x61 action: PRESS mods: none text: 'a' + +#: Here, the key name for the A key is 0x61 and you can use it with:: + +#: map ctrl+0x61 something + +#: to map Ctrl+A to something. + +#: You can use the special action no_op to unmap a keyboard shortcut +#: that is assigned in the default configuration:: + +#: map kitty_mod+space no_op + +#: If you would like kitty to completely ignore a key event, not even +#: sending it to the program running in the terminal, map it to +#: discard_event:: + +#: map kitty_mod+f1 discard_event + +#: You can combine multiple actions to be triggered by a single +#: shortcut with combine action, using the syntax below:: + +#: map key combine action1 action2 action3 ... + +#: For example:: + +#: map kitty_mod+e combine : new_window : next_layout + +#: This will create a new window and switch to the next available +#: layout. + +#: You can use multi-key shortcuts with the syntax shown below:: + +#: map key1>key2>key3 action + +#: For example:: + +#: map ctrl+f>2 set_font_size 20 + +#: The full list of actions that can be mapped to key presses is +#: available here . + +# kitty_mod ctrl+shift + +#: Special modifier key alias for default shortcuts. You can change +#: the value of this option to alter all default shortcuts that use +#: kitty_mod. + +# clear_all_shortcuts no + +#: Remove all shortcut definitions up to this point. Useful, for +#: instance, to remove the default shortcuts. + +# action_alias + +#: E.g. action_alias launch_tab launch --type=tab --cwd=current + +#: Define action aliases to avoid repeating the same options in +#: multiple mappings. Aliases can be defined for any action and will +#: be expanded recursively. For example, the above alias allows you to +#: create mappings to launch a new tab in the current working +#: directory without duplication:: + +#: map f1 launch_tab vim +#: map f2 launch_tab emacs + +#: Similarly, to alias kitten invocation:: + +#: action_alias hints kitten hints --hints-offset=0 + +# kitten_alias + +#: E.g. kitten_alias hints hints --hints-offset=0 + +#: Like action_alias above, but specifically for kittens. Generally, +#: prefer to use action_alias. This option is a legacy version, +#: present for backwards compatibility. It causes all invocations of +#: the aliased kitten to be substituted. So the example above will +#: cause all invocations of the hints kitten to have the --hints- +#: offset=0 option applied. + +#: Clipboard {{{ + +#: Copy to clipboard + +# map kitty_mod+c copy_to_clipboard +# map cmd+c copy_to_clipboard + +#:: There is also a copy_or_interrupt action that can be optionally +#:: mapped to Ctrl+C. It will copy only if there is a selection and +#:: send an interrupt otherwise. Similarly, +#:: copy_and_clear_or_interrupt will copy and clear the selection or +#:: send an interrupt if there is no selection. + +#: Paste from clipboard + +# map kitty_mod+v paste_from_clipboard +# map cmd+v paste_from_clipboard + +#: Paste from selection + +# map kitty_mod+s paste_from_selection +# map shift+insert paste_from_selection + +#: Pass selection to program + +# map kitty_mod+o pass_selection_to_program + +#:: You can also pass the contents of the current selection to any +#:: program with pass_selection_to_program. By default, the system's +#:: open program is used, but you can specify your own, the selection +#:: will be passed as a command line argument to the program. For +#:: example:: + +#:: map kitty_mod+o pass_selection_to_program firefox + +#:: You can pass the current selection to a terminal program running +#:: in a new kitty window, by using the @selection placeholder:: + +#:: map kitty_mod+y new_window less @selection + +#: }}} + +#: Scrolling {{{ + +#: Scroll line up + +# map kitty_mod+up scroll_line_up +# map kitty_mod+k scroll_line_up +# map opt+cmd+page_up scroll_line_up +# map cmd+up scroll_line_up + +#: Scroll line down + +# map kitty_mod+down scroll_line_down +# map kitty_mod+j scroll_line_down +# map opt+cmd+page_down scroll_line_down +# map cmd+down scroll_line_down + +#: Scroll page up + +# map kitty_mod+page_up scroll_page_up +# map cmd+page_up scroll_page_up + +#: Scroll page down + +# map kitty_mod+page_down scroll_page_down +# map cmd+page_down scroll_page_down + +#: Scroll to top + +# map kitty_mod+home scroll_home +# map cmd+home scroll_home + +#: Scroll to bottom + +# map kitty_mod+end scroll_end +# map cmd+end scroll_end + +#: Scroll to previous shell prompt + +# map kitty_mod+z scroll_to_prompt -1 + +#:: Use a parameter of 0 for scroll_to_prompt to scroll to the last +#:: jumped to or the last clicked position. Requires shell +#:: integration +#:: to work. + +#: Scroll to next shell prompt + +# map kitty_mod+x scroll_to_prompt 1 + +#: Browse scrollback buffer in pager + +# map kitty_mod+h show_scrollback + +#:: You can pipe the contents of the current screen and history +#:: buffer as STDIN to an arbitrary program using launch --stdin- +#:: source. For example, the following opens the scrollback buffer in +#:: less in an overlay window:: + +#:: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R + +#:: For more details on piping screen and buffer contents to external +#:: programs, see launch . + +#: Browse output of the last shell command in pager + +# map kitty_mod+g show_last_command_output + +#:: You can also define additional shortcuts to get the command +#:: output. For example, to get the first command output on screen:: + +#:: map f1 show_first_command_output_on_screen + +#:: To get the command output that was last accessed by a keyboard +#:: action or mouse action:: + +#:: map f1 show_last_visited_command_output + +#:: You can pipe the output of the last command run in the shell +#:: using the launch action. For example, the following opens the +#:: output in less in an overlay window:: + +#:: map f1 launch --stdin-source=@last_cmd_output --stdin-add-formatting --type=overlay less +G -R + +#:: To get the output of the first command on the screen, use +#:: @first_cmd_output_on_screen. To get the output of the last jumped +#:: to command, use @last_visited_cmd_output. + +#:: Requires shell integration +#:: to work. + +#: }}} + +#: Window management {{{ + +#: New window + +# map kitty_mod+enter new_window +# map cmd+enter new_window + +#:: You can open a new kitty window running an arbitrary program, for +#:: example:: + +#:: map kitty_mod+y launch mutt + +#:: You can open a new window with the current working directory set +#:: to the working directory of the current window using:: + +#:: map ctrl+alt+enter launch --cwd=current + +#:: You can open a new window that is allowed to control kitty via +#:: the kitty remote control facility with launch --allow-remote- +#:: control. Any programs running in that window will be allowed to +#:: control kitty. For example:: + +#:: map ctrl+enter launch --allow-remote-control some_program + +#:: You can open a new window next to the currently active window or +#:: as the first window, with:: + +#:: map ctrl+n launch --location=neighbor +#:: map ctrl+f launch --location=first + +#:: For more details, see launch +#:: . + +#: New OS window + +# map kitty_mod+n new_os_window +# map cmd+n new_os_window + +#:: Works like new_window above, except that it opens a top-level OS +#:: window. In particular you can use new_os_window_with_cwd to open +#:: a window with the current working directory. + +#: Close window + +# map kitty_mod+w close_window +# map shift+cmd+d close_window + +#: Next window + +# map kitty_mod+] next_window + +#: Previous window + +# map kitty_mod+[ previous_window + +#: Move window forward + +# map kitty_mod+f move_window_forward + +#: Move window backward + +# map kitty_mod+b move_window_backward + +#: Move window to top + +# map kitty_mod+` move_window_to_top + +#: Start resizing window + +# map kitty_mod+r start_resizing_window +# map cmd+r start_resizing_window + +#: First window + +# map kitty_mod+1 first_window +# map cmd+1 first_window + +#: Second window + +# map kitty_mod+2 second_window +# map cmd+2 second_window + +#: Third window + +# map kitty_mod+3 third_window +# map cmd+3 third_window + +#: Fourth window + +# map kitty_mod+4 fourth_window +# map cmd+4 fourth_window + +#: Fifth window + +# map kitty_mod+5 fifth_window +# map cmd+5 fifth_window + +#: Sixth window + +# map kitty_mod+6 sixth_window +# map cmd+6 sixth_window + +#: Seventh window + +# map kitty_mod+7 seventh_window +# map cmd+7 seventh_window + +#: Eighth window + +# map kitty_mod+8 eighth_window +# map cmd+8 eighth_window + +#: Ninth window + +# map kitty_mod+9 ninth_window +# map cmd+9 ninth_window + +#: Tenth window + +# map kitty_mod+0 tenth_window + +#: Visually select and focus window + +# map kitty_mod+f7 focus_visible_window + +#:: Display overlay numbers and alphabets on the window, and switch +#:: the focus to the window when you press the key. When there are +#:: only two windows, the focus will be switched directly without +#:: displaying the overlay. You can change the overlay characters and +#:: their order with option visual_window_select_characters. + +#: Visually swap window with another + +# map kitty_mod+f8 swap_with_window + +#:: Works like focus_visible_window above, but swaps the window. + +#: }}} + +#: Tab management {{{ + +#: Next tab + +# map kitty_mod+right next_tab +# map shift+cmd+] next_tab +# map ctrl+tab next_tab + +#: Previous tab + +# map kitty_mod+left previous_tab +# map shift+cmd+[ previous_tab +# map ctrl+shift+tab previous_tab + +#: New tab + +# map kitty_mod+t new_tab +# map cmd+t new_tab + +#: Close tab + +# map kitty_mod+q close_tab +# map cmd+w close_tab + +#: Close OS window + +# map shift+cmd+w close_os_window + +#: Move tab forward + +# map kitty_mod+. move_tab_forward + +#: Move tab backward + +# map kitty_mod+, move_tab_backward + +#: Set tab title + +# map kitty_mod+alt+t set_tab_title +# map shift+cmd+i set_tab_title + + +#: You can also create shortcuts to go to specific tabs, with 1 being +#: the first tab, 2 the second tab and -1 being the previously active +#: tab, and any number larger than the last tab being the last tab:: + +#: map ctrl+alt+1 goto_tab 1 +#: map ctrl+alt+2 goto_tab 2 + +#: Just as with new_window above, you can also pass the name of +#: arbitrary commands to run when using new_tab and new_tab_with_cwd. +#: Finally, if you want the new tab to open next to the current tab +#: rather than at the end of the tabs list, use:: + +#: map ctrl+t new_tab !neighbor [optional cmd to run] +#: }}} + +#: Layout management {{{ + +#: Next layout + +# map kitty_mod+l next_layout + + +#: You can also create shortcuts to switch to specific layouts:: + +#: map ctrl+alt+t goto_layout tall +#: map ctrl+alt+s goto_layout stack + +#: Similarly, to switch back to the previous layout:: + +#: map ctrl+alt+p last_used_layout + +#: There is also a toggle_layout action that switches to the named +#: layout or back to the previous layout if in the named layout. +#: Useful to temporarily "zoom" the active window by switching to the +#: stack layout:: + +#: map ctrl+alt+z toggle_layout stack +#: }}} + +#: Font sizes {{{ + +#: You can change the font size for all top-level kitty OS windows at +#: a time or only the current one. + +#: Increase font size + +# map kitty_mod+equal change_font_size all +2.0 +# map kitty_mod+plus change_font_size all +2.0 +# map kitty_mod+kp_add change_font_size all +2.0 +# map cmd+plus change_font_size all +2.0 +# map cmd+equal change_font_size all +2.0 +# map shift+cmd+equal change_font_size all +2.0 + +#: Decrease font size + +# map kitty_mod+minus change_font_size all -2.0 +# map kitty_mod+kp_subtract change_font_size all -2.0 +# map cmd+minus change_font_size all -2.0 +# map shift+cmd+minus change_font_size all -2.0 + +#: Reset font size + +# map kitty_mod+backspace change_font_size all 0 +# map cmd+0 change_font_size all 0 + + +#: To setup shortcuts for specific font sizes:: + +#: map kitty_mod+f6 change_font_size all 10.0 + +#: To setup shortcuts to change only the current OS window's font +#: size:: + +#: map kitty_mod+f6 change_font_size current 10.0 +#: }}} + +#: Select and act on visible text {{{ + +#: Use the hints kitten to select text and either pass it to an +#: external program or insert it into the terminal or copy it to the +#: clipboard. + +#: Open URL + +# map kitty_mod+e open_url_with_hints + +#:: Open a currently visible URL using the keyboard. The program used +#:: to open the URL is specified in open_url_with. + +#: Insert selected path + +# map kitty_mod+p>f kitten hints --type path --program - + +#:: Select a path/filename and insert it into the terminal. Useful, +#:: for instance to run git commands on a filename output from a +#:: previous git command. + +#: Open selected path + +# map kitty_mod+p>shift+f kitten hints --type path + +#:: Select a path/filename and open it with the default open program. + +#: Insert selected line + +# map kitty_mod+p>l kitten hints --type line --program - + +#:: Select a line of text and insert it into the terminal. Useful for +#:: the output of things like: `ls -1`. + +#: Insert selected word + +# map kitty_mod+p>w kitten hints --type word --program - + +#:: Select words and insert into terminal. + +#: Insert selected hash + +# map kitty_mod+p>h kitten hints --type hash --program - + +#:: Select something that looks like a hash and insert it into the +#:: terminal. Useful with git, which uses SHA1 hashes to identify +#:: commits. + +#: Open the selected file at the selected line + +# map kitty_mod+p>n kitten hints --type linenum + +#:: Select something that looks like filename:linenum and open it in +#:: vim at the specified line number. + +#: Open the selected hyperlink + +# map kitty_mod+p>y kitten hints --type hyperlink + +#:: Select a hyperlink (i.e. a URL that has been marked as such by +#:: the terminal program, for example, by `ls --hyperlink=auto`). + + +#: The hints kitten has many more modes of operation that you can map +#: to different shortcuts. For a full description see hints kitten +#: . +#: }}} + +#: Miscellaneous {{{ + +#: Show documentation + +# map kitty_mod+f1 show_kitty_doc overview + +#: Toggle fullscreen + +# map kitty_mod+f11 toggle_fullscreen +# map ctrl+cmd+f toggle_fullscreen + +#: Toggle maximized + +# map kitty_mod+f10 toggle_maximized + +#: Toggle macOS secure keyboard entry + +# map opt+cmd+s toggle_macos_secure_keyboard_entry + +#: Unicode input + +# map kitty_mod+u kitten unicode_input +# map ctrl+cmd+space kitten unicode_input + +#: Edit config file + +# map kitty_mod+f2 edit_config_file +# map cmd+, edit_config_file + +#: Open the kitty command shell + +# map kitty_mod+escape kitty_shell window + +#:: Open the kitty shell in a new window / tab / overlay / os_window +#:: to control kitty using commands. + +#: Increase background opacity + +# map kitty_mod+a>m set_background_opacity +0.1 + +#: Decrease background opacity + +# map kitty_mod+a>l set_background_opacity -0.1 + +#: Make background fully opaque + +# map kitty_mod+a>1 set_background_opacity 1 + +#: Reset background opacity + +# map kitty_mod+a>d set_background_opacity default + +#: Reset the terminal + +# map kitty_mod+delete clear_terminal reset active +# map opt+cmd+r clear_terminal reset active + +#:: You can create shortcuts to clear/reset the terminal. For +#:: example:: + +#:: # Reset the terminal +#:: map f1 clear_terminal reset active +#:: # Clear the terminal screen by erasing all contents +#:: map f1 clear_terminal clear active +#:: # Clear the terminal scrollback by erasing it +#:: map f1 clear_terminal scrollback active +#:: # Scroll the contents of the screen into the scrollback +#:: map f1 clear_terminal scroll active +#:: # Clear everything up to the line with the cursor +#:: map f1 clear_terminal to_cursor active + +#:: If you want to operate on all kitty windows instead of just the +#:: current one, use all instead of active. + +#:: Some useful functions that can be defined in the shell rc files +#:: to perform various kinds of clearing of the current window: + +#:: .. code-block:: sh + +#:: clear-only-screen() { +#:: printf "\e[H\e[2J" +#:: } + +#:: clear-screen-and-scrollback() { +#:: printf "\e[H\e[3J" +#:: } + +#:: clear-screen-saving-contents-in-scrollback() { +#:: printf "\e[H\e[22J" +#:: } + +#:: For instance, using these escape codes, it is possible to remap +#:: Ctrl+L to both scroll the current screen contents into the +#:: scrollback buffer and clear the screen, instead of just clearing +#:: the screen. For ZSH, in ~/.zshrc, add: + +#:: .. code-block:: zsh + +#:: ctrl_l() { +#:: builtin print -rn -- $'\r\e[0J\e[H\e[22J' >"$TTY" +#:: builtin zle .reset-prompt +#:: builtin zle -R +#:: } +#:: zle -N ctrl_l +#:: bindkey '^l' ctrl_l + +#: Clear up to cursor line + +# map cmd+k clear_terminal to_cursor active + +#: Reload kitty.conf + +# map kitty_mod+f5 load_config_file +# map ctrl+cmd+, load_config_file + +#:: Reload kitty.conf, applying any changes since the last time it +#:: was loaded. Note that a handful of options cannot be dynamically +#:: changed and require a full restart of kitty. Particularly, when +#:: changing shortcuts for actions located on the macOS global menu +#:: bar, a full restart is needed. You can also map a keybinding to +#:: load a different config file, for example:: + +#:: map f5 load_config /path/to/alternative/kitty.conf + +#:: Note that all options from the original kitty.conf are discarded, +#:: in other words the new configuration *replace* the old ones. + +#: Debug kitty configuration + +# map kitty_mod+f6 debug_config +# map opt+cmd+, debug_config + +#:: Show details about exactly what configuration kitty is running +#:: with and its host environment. Useful for debugging issues. + +#: Send arbitrary text on key presses + +#:: E.g. map ctrl+shift+alt+h send_text all Hello World + +#:: You can tell kitty to send arbitrary (UTF-8) encoded text to the +#:: client program when pressing specified shortcut keys. For +#:: example:: + +#:: map ctrl+alt+a send_text all Special text + +#:: This will send "Special text" when you press the Ctrl+Alt+A key +#:: combination. The text to be sent decodes ANSI C escapes +#:: so you can use escapes like \e to send control +#:: codes or \u21fb to send Unicode characters (or you can just input +#:: the Unicode characters directly as UTF-8 text). You can use +#:: `kitten show_key` to get the key escape codes you want to +#:: emulate. + +#:: The first argument to send_text is the keyboard modes in which to +#:: activate the shortcut. The possible values are normal, +#:: application, kitty or a comma separated combination of them. The +#:: modes normal and application refer to the DECCKM cursor key mode +#:: for terminals, and kitty refers to the kitty extended keyboard +#:: protocol. The special value all means all of them. + +#:: Some more examples:: + +#:: # Output a word and move the cursor to the start of the line (like typing and pressing Home) +#:: map ctrl+alt+a send_text normal Word\e[H +#:: map ctrl+alt+a send_text application Word\eOH +#:: # Run a command at a shell prompt (like typing the command and pressing Enter) +#:: map ctrl+alt+a send_text normal,application some command with arguments\r + +#: Open kitty Website + +# map shift+cmd+/ open_url https://sw.kovidgoyal.net/kitty/ + +#: Hide macOS kitty application + +# map cmd+h hide_macos_app + +#: Hide macOS other applications + +# map opt+cmd+h hide_macos_other_apps + +#: Minimize macOS window + +# map cmd+m minimize_macos_window + +#: Quit kitty + +# map cmd+q quit + +#: }}} + +#: }}} diff --git a/dot_config/private_htop/private_htoprc b/dot_config/private_htop/private_htoprc new file mode 100644 index 0000000..1153b8e --- /dev/null +++ b/dot_config/private_htop/private_htoprc @@ -0,0 +1,63 @@ +# Beware! This file is rewritten by htop when settings are changed in the interface. +# The parser is also very primitive, and not human-friendly. +htop_version=3.3.0 +config_reader_min_version=3 +fields=0 48 17 18 38 39 40 2 46 47 49 1 +hide_kernel_threads=1 +hide_userland_threads=0 +hide_running_in_container=0 +shadow_other_users=0 +show_thread_names=1 +show_program_path=1 +highlight_base_name=1 +highlight_deleted_exe=1 +shadow_distribution_path_prefix=1 +highlight_megabytes=1 +highlight_threads=1 +highlight_changes=0 +highlight_changes_delay_secs=5 +find_comm_in_cmdline=1 +strip_exe_from_cmdline=1 +show_merged_command=1 +header_margin=1 +screen_tabs=1 +detailed_cpu_time=0 +cpu_count_from_one=0 +show_cpu_usage=1 +show_cpu_frequency=1 +show_cpu_temperature=1 +degree_fahrenheit=0 +update_process_names=1 +account_guest_in_cpu_meter=0 +color_scheme=0 +enable_mouse=1 +delay=15 +hide_function_bar=0 +header_layout=two_50_50 +column_meters_0=LeftCPUs2 Memory Swap +column_meter_modes_0=1 1 1 +column_meters_1=RightCPUs2 Tasks LoadAverage Uptime +column_meter_modes_1=1 2 2 2 +tree_view=0 +sort_key=46 +tree_sort_key=0 +sort_direction=-1 +tree_sort_direction=1 +tree_view_always_by_pid=0 +all_branches_collapsed=0 +screen:Main=PID USER PRIORITY NICE M_VIRT M_RESIDENT M_SHARE STATE PERCENT_CPU PERCENT_MEM TIME Command +.sort_key=PERCENT_CPU +.tree_sort_key=PID +.tree_view_always_by_pid=0 +.tree_view=0 +.sort_direction=-1 +.tree_sort_direction=1 +.all_branches_collapsed=0 +screen:I/O=PID USER IO_PRIORITY IO_RATE IO_READ_RATE IO_WRITE_RATE PERCENT_SWAP_DELAY PERCENT_IO_DELAY Command +.sort_key=IO_RATE +.tree_sort_key=PID +.tree_view_always_by_pid=0 +.tree_view=0 +.sort_direction=-1 +.tree_sort_direction=1 +.all_branches_collapsed=0 diff --git a/dot_local/share/powerlevel10k b/dot_local/share/powerlevel10k index 087405d..0996a94 160000 --- a/dot_local/share/powerlevel10k +++ b/dot_local/share/powerlevel10k @@ -1 +1 @@ -Subproject commit 087405df7838f4c3e835025699bd7b98b9731acc +Subproject commit 0996a9411824cbfe8fdd8cb17448c94ef891be34 -- cgit v1.2.3