Forget to add a bunch of things

oops

15 files changed, 390 insertions, 202 deletions

diff --git a/Lab 2.X/Lab2A.s b/Lab2A.X/Lab2A.s
index fa35d55..407def8 100644
--- a/Lab 2.X/Lab2A.s
+++ b/Lab2A.X/Lab2A.s
@@ -1,123 +1,123 @@
-

-.include "xc.inc"          ; required "boiler-plate" (BP)

-

-;the next two lines set up the actual chip for operation - required

-config __CONFIG2, POSCMOD_EC & I2C1SEL_SEC & IOL1WAY_OFF & OSCIOFNC_ON & FCKSM_CSECME & FNOSC_FRCPLL & SOSCSEL_LPSOSC & WUTSEL_FST & IESO_OFF

-config __CONFIG1, WDTPS_PS1 & FWPSA_PR32 & WINDIS_OFF & FWDTEN_OFF & BKBUG_ON & GWRP_ON & GCP_ON & JTAGEN_OFF

-

-    .bss        ; put the following labels in RAM

-counter:

-    .space 2    ; a variable that takes two bytes (we won?t use

-                ; it for now, but put here to make this a generic

-                ; template to be used later).

-stack:

-    .space  32  ; this will be our stack area, needed for func calls

-

-.text           ; BP (put the following data in ROM(program memory))

-

-;because we are using the C compiler to assemble our code, we need a "_main" label

-;somewhere. (There's a link step that looks for it.)

-.global _main               ;BP

-;your functions go here

-

-_main:

-

-    bclr    CLKDIV,#8                 ;BP

-    nop

-    ;; --- Begin your main program below here ---

-    

-    

-    mov     #0x9fff,w0  

-    mov     w0,AD1PCFG            ; Set all pins to digital mode

-    mov     #0b1111111111111110,w0  

-    mov     w0,TRISA            ; set pin RA0 to output

-    mov     #0x0000,w0  

-    mov     w0,LATA            ; set pin RA0 low

-    call delay_100us

-    call setColor

-    call foreverLoop

-   

-wait_24cycles:

-                     ; 2 cycles for function call

-    repeat #17        ; 1 cycle to load and prep

-    nop              ; 17+1 cycles to execute NOP 18 times

-    return           ; 3 cycles for the return

-    

-wait_32cycles: ; 2

-    repeat #24 ; 1

-    nop	       ; 25+1 cycles = 26

-    return     ; 3

-    

-delay_100us:

-    repeat #1593

-    nop

-    return

-    

-delay_1ms:

-    repeat #15993

-    nop

-    return

-    

-write_bit_stream:

-    call    wait_24cycles     ; 24 cycles

-    clr     LATA              ; set pin RA0 low = 1 cycle

-    call    wait_32cycles     ; 32 cycles

-    inc    LATA               ; set pin RA0 high = 1 cycle

-    return

-

-write_0:      ;2 cycles for function call

-    inc LATA  ;1

-    repeat #3 ;1 for load

-    nop	      ;3+1=4 nop

-    clr LATA  ;1

-    repeat #6 ;1 for load

-    nop       ;1+6=7 nop

-    return    ;3 return

-    

-    

-write_1:      ;2 cycle call

-    inc LATA  ;1

-    repeat #10;1 load

-    nop	      ;1+10=11 nop

-    clr LATA  ;1

-    nop       ;1

-    return    ;3 return

-    

-setColor:

-    ;Set R

-    call write_1

-    call write_1

-    call write_1

-    call write_1

-    call write_1

-    call write_1

-    call write_1

-    call write_1

-    ;Set G

-    call write_1

-    call write_0

-    call write_0

-    call write_1

-    call write_1

-    call write_0

-    call write_1

-    call write_1

-    ;Set B

-    call write_0

-    call write_0

-    call write_0

-    call write_0

-    call write_0

-    call write_0

-    call write_0

-    call write_0

-    

-    return

-    

-foreverLoop:

-;   call write_bit_stream

-    nop

-    bra foreverLoop

-    

-

-.end 

+
+.include "xc.inc"          ; required "boiler-plate" (BP)
+
+;the next two lines set up the actual chip for operation - required
+config __CONFIG2, POSCMOD_EC & I2C1SEL_SEC & IOL1WAY_OFF & OSCIOFNC_ON & FCKSM_CSECME & FNOSC_FRCPLL & SOSCSEL_LPSOSC & WUTSEL_FST & IESO_OFF
+config __CONFIG1, WDTPS_PS1 & FWPSA_PR32 & WINDIS_OFF & FWDTEN_OFF & BKBUG_ON & GWRP_ON & GCP_ON & JTAGEN_OFF
+
+    .bss        ; put the following labels in RAM
+counter:
+    .space 2    ; a variable that takes two bytes (we won?t use
+                ; it for now, but put here to make this a generic
+                ; template to be used later).
+stack:
+    .space  32  ; this will be our stack area, needed for func calls
+
+.text           ; BP (put the following data in ROM(program memory))
+
+;because we are using the C compiler to assemble our code, we need a "_main" label
+;somewhere. (There's a link step that looks for it.)
+.global _main               ;BP
+;your functions go here
+
+_main:
+
+    bclr    CLKDIV,#8                 ;BP
+    nop
+    ;; --- Begin your main program below here ---
+    
+    
+    mov     #0x9fff,w0  
+    mov     w0,AD1PCFG            ; Set all pins to digital mode
+    mov     #0b1111111111111110,w0  
+    mov     w0,TRISA            ; set pin RA0 to output
+    mov     #0x0000,w0  
+    mov     w0,LATA            ; set pin RA0 low
+    call delay_100us
+    call setColor
+    call foreverLoop
+   
+wait_24cycles:
+                     ; 2 cycles for function call
+    repeat #17        ; 1 cycle to load and prep
+    nop              ; 17+1 cycles to execute NOP 18 times
+    return           ; 3 cycles for the return
+    
+wait_32cycles: ; 2
+    repeat #24 ; 1
+    nop	       ; 25+1 cycles = 26
+    return     ; 3
+    
+delay_100us:
+    repeat #1593
+    nop
+    return
+    
+delay_1ms:
+    repeat #15993
+    nop
+    return
+    
+write_bit_stream:
+    call    wait_24cycles     ; 24 cycles
+    clr     LATA              ; set pin RA0 low = 1 cycle
+    call    wait_32cycles     ; 32 cycles
+    inc    LATA               ; set pin RA0 high = 1 cycle
+    return
+
+write_0:      ;2 cycles for function call
+    inc LATA  ;1
+    repeat #3 ;1 for load
+    nop	      ;3+1=4 nop
+    clr LATA  ;1
+    repeat #6 ;1 for load
+    nop       ;1+6=7 nop
+    return    ;3 return
+    
+    
+write_1:      ;2 cycle call
+    inc LATA  ;1
+    repeat #10;1 load
+    nop	      ;1+10=11 nop
+    clr LATA  ;1
+    nop       ;1
+    return    ;3 return
+    
+setColor:
+    ;Set R
+    call write_1
+    call write_1
+    call write_1
+    call write_1
+    call write_1
+    call write_1
+    call write_1
+    call write_1
+    ;Set G
+    call write_1
+    call write_0
+    call write_0
+    call write_1
+    call write_1
+    call write_0
+    call write_1
+    call write_1
+    ;Set B
+    call write_0
+    call write_0
+    call write_0
+    call write_0
+    call write_0
+    call write_0
+    call write_0
+    call write_0
+    
+    return
+    
+foreverLoop:
+;   call write_bit_stream
+    nop
+    bra foreverLoop
+    
+
+.end 
diff --git a/Lab 1.X/Makefile b/Lab2A.X/Makefile
index fca8e2c..fca8e2c 100644
--- a/Lab 1.X/Makefile
+++ b/Lab2A.X/Makefile
diff --git a/Lab 2.X/debug/default/defmplabxtrace.log b/Lab2A.X/debug/default/defmplabxtrace.log
index e69de29..e69de29 100644
--- a/Lab 2.X/debug/default/defmplabxtrace.log
+++ b/Lab2A.X/debug/default/defmplabxtrace.log
diff --git a/Lab 2.X/debug/default/defmplabxtrace.log.inx b/Lab2A.X/debug/default/defmplabxtrace.log.inx
index 87765a0..87765a0 100644
--- a/Lab 2.X/debug/default/defmplabxtrace.log.inx
+++ b/Lab2A.X/debug/default/defmplabxtrace.log.inx
diff --git a/HW3.X/dist/default/debug/memoryfile.xml b/Lab2A.X/dist/default/debug/memoryfile.xml
index c74e6e0..2a720f9 100644
--- a/HW3.X/dist/default/debug/memoryfile.xml
+++ b/Lab2A.X/dist/default/debug/memoryfile.xml
@@ -1,18 +1,18 @@
-<?xml version="1.0" encoding="UTF-8"?>

-

-<project>

-  <executable name="dist/default/debug/HW3.X.debug.elf">

-    <memory name="data">

-      <units>bytes</units>

-      <length>8192</length>

-      <used>10</used>

-      <free>8182</free>

-    </memory>

-    <memory name="program">

-      <units>bytes</units>

-      <length>65274</length>

-      <used>594</used>

-      <free>64680</free>

-    </memory>

-  </executable>

-</project>

+<?xml version="1.0" encoding="UTF-8"?>
+
+<project>
+  <executable name="dist/default/debug/Lab_2.X.debug.elf">
+    <memory name="data">
+      <units>bytes</units>
+      <length>8192</length>
+      <used>34</used>
+      <free>8158</free>
+    </memory>
+    <memory name="program">
+      <units>bytes</units>
+      <length>65274</length>
+      <used>408</used>
+      <free>64866</free>
+    </memory>
+  </executable>
+</project>
diff --git a/Lab 2.X/nbproject/Makefile-default.mk b/Lab2A.X/nbproject/Makefile-default.mk
index 8201bc4..8201bc4 100644
--- a/Lab 2.X/nbproject/Makefile-default.mk
+++ b/Lab2A.X/nbproject/Makefile-default.mk
diff --git a/Lab 2.X/nbproject/Makefile-genesis.properties b/Lab2A.X/nbproject/Makefile-genesis.properties
index 114011e..114011e 100644
--- a/Lab 2.X/nbproject/Makefile-genesis.properties
+++ b/Lab2A.X/nbproject/Makefile-genesis.properties
diff --git a/Lab 2.X/nbproject/Makefile-impl.mk b/Lab2A.X/nbproject/Makefile-impl.mk
index d637c96..d637c96 100644
--- a/Lab 2.X/nbproject/Makefile-impl.mk
+++ b/Lab2A.X/nbproject/Makefile-impl.mk
diff --git a/Lab 2.X/nbproject/Makefile-local-default.mk b/Lab2A.X/nbproject/Makefile-local-default.mk
index 214e7fa..214e7fa 100644
--- a/Lab 2.X/nbproject/Makefile-local-default.mk
+++ b/Lab2A.X/nbproject/Makefile-local-default.mk
diff --git a/Lab 2.X/nbproject/Makefile-variables.mk b/Lab2A.X/nbproject/Makefile-variables.mk
index 358d783..358d783 100644
--- a/Lab 2.X/nbproject/Makefile-variables.mk
+++ b/Lab2A.X/nbproject/Makefile-variables.mk
diff --git a/Lab 2.X/nbproject/Package-default.bash b/Lab2A.X/nbproject/Package-default.bash
index 6270138..6270138 100644
--- a/Lab 2.X/nbproject/Package-default.bash
+++ b/Lab2A.X/nbproject/Package-default.bash
diff --git a/Lab2A.X/nbproject/configurations.xml b/Lab2A.X/nbproject/configurations.xml
new file mode 100644
index 0000000..6f98ba3
--- /dev/null
+++ b/Lab2A.X/nbproject/configurations.xml
@@ -0,0 +1,190 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="65">
+  <logicalFolder name="root" displayName="root" projectFiles="true">
+    <logicalFolder name="HeaderFiles"
+                   displayName="Header Files"
+                   projectFiles="true">
+    </logicalFolder>
+    <logicalFolder name="LinkerScript"
+                   displayName="Linker Files"
+                   projectFiles="true">
+    </logicalFolder>
+    <logicalFolder name="SourceFiles"
+                   displayName="Source Files"
+                   projectFiles="true">
+    </logicalFolder>
+    <logicalFolder name="ExternalFiles"
+                   displayName="Important Files"
+                   projectFiles="false">
+      <itemPath>Makefile</itemPath>
+    </logicalFolder>
+    <itemPath>Lab2A.s</itemPath>
+  </logicalFolder>
+  <projectmakefile>Makefile</projectmakefile>
+  <confs>
+    <conf name="default" type="2">
+      <toolsSet>
+        <developmentServer>localhost</developmentServer>
+        <targetDevice>PIC24FJ64GA002</targetDevice>
+        <targetHeader></targetHeader>
+        <targetPluginBoard></targetPluginBoard>
+        <platformTool>Simulator</platformTool>
+        <languageToolchain>XC16</languageToolchain>
+        <languageToolchainVersion>1.41</languageToolchainVersion>
+        <platform>3</platform>
+      </toolsSet>
+      <packs>
+        <pack name="PIC24F-GA-GB_DFP" vendor="Microchip" version="1.1.74"/>
+      </packs>
+      <compileType>
+        <linkerTool>
+          <linkerLibItems>
+          </linkerLibItems>
+        </linkerTool>
+        <archiverTool>
+        </archiverTool>
+        <loading>
+          <useAlternateLoadableFile>false</useAlternateLoadableFile>
+          <parseOnProdLoad>false</parseOnProdLoad>
+          <alternateLoadableFile></alternateLoadableFile>
+        </loading>
+        <subordinates>
+        </subordinates>
+      </compileType>
+      <makeCustomizationType>
+        <makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
+        <makeCustomizationPreStep></makeCustomizationPreStep>
+        <makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
+        <makeCustomizationPostStep></makeCustomizationPostStep>
+        <makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
+        <makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
+        <makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
+      </makeCustomizationType>
+      <C30>
+        <property key="code-model" value="default"/>
+        <property key="const-model" value="default"/>
+        <property key="data-model" value="default"/>
+        <property key="disable-instruction-scheduling" value="false"/>
+        <property key="enable-all-warnings" value="true"/>
+        <property key="enable-ansi-std" value="false"/>
+        <property key="enable-ansi-warnings" value="false"/>
+        <property key="enable-fatal-warnings" value="false"/>
+        <property key="enable-large-arrays" value="false"/>
+        <property key="enable-omit-frame-pointer" value="false"/>
+        <property key="enable-procedural-abstraction" value="false"/>
+        <property key="enable-short-double" value="false"/>
+        <property key="enable-symbols" value="true"/>
+        <property key="enable-unroll-loops" value="false"/>
+        <property key="extra-include-directories" value=""/>
+        <property key="isolate-each-function" value="false"/>
+        <property key="keep-inline" value="false"/>
+        <property key="oXC16gcc-align-arr" value="false"/>
+        <property key="oXC16gcc-cnsts-mauxflash" value="false"/>
+        <property key="oXC16gcc-data-sects" value="false"/>
+        <property key="oXC16gcc-errata" value=""/>
+        <property key="oXC16gcc-fillupper" value=""/>
+        <property key="oXC16gcc-large-aggregate" value="false"/>
+        <property key="oXC16gcc-mauxflash" value="false"/>
+        <property key="oXC16gcc-mpa-lvl" value=""/>
+        <property key="oXC16gcc-name-text-sec" value=""/>
+        <property key="oXC16gcc-near-chars" value="false"/>
+        <property key="oXC16gcc-no-isr-warn" value="false"/>
+        <property key="oXC16gcc-sfr-warn" value="false"/>
+        <property key="oXC16gcc-smar-io-lvl" value="1"/>
+        <property key="oXC16gcc-smart-io-fmt" value=""/>
+        <property key="optimization-level" value="0"/>
+        <property key="post-instruction-scheduling" value="default"/>
+        <property key="pre-instruction-scheduling" value="default"/>
+        <property key="preprocessor-macros" value=""/>
+        <property key="scalar-model" value="default"/>
+        <property key="use-cci" value="false"/>
+        <property key="use-iar" value="false"/>
+      </C30>
+      <C30-AR>
+        <property key="additional-options-chop-files" value="false"/>
+      </C30-AR>
+      <C30-AS>
+        <property key="assembler-symbols" value=""/>
+        <property key="expand-macros" value="false"/>
+        <property key="extra-include-directories-for-assembler" value=""/>
+        <property key="extra-include-directories-for-preprocessor" value=""/>
+        <property key="false-conditionals" value="false"/>
+        <property key="keep-locals" value="false"/>
+        <property key="list-assembly" value="false"/>
+        <property key="list-section-info" value="false"/>
+        <property key="list-source" value="false"/>
+        <property key="list-symbols" value="false"/>
+        <property key="oXC16asm-extra-opts" value=""/>
+        <property key="oXC16asm-list-to-file" value="false"/>
+        <property key="omit-debug-dirs" value="false"/>
+        <property key="omit-forms" value="false"/>
+        <property key="preprocessor-macros" value=""/>
+        <property key="relax" value="false"/>
+        <property key="warning-level" value="emit-warnings"/>
+      </C30-AS>
+      <C30-CO>
+        <property key="coverage-enable" value=""/>
+      </C30-CO>
+      <C30-LD>
+        <property key="additional-options-use-response-files" value="false"/>
+        <property key="boot-eeprom" value="no_eeprom"/>
+        <property key="boot-flash" value="no_flash"/>
+        <property key="boot-ram" value="no_ram"/>
+        <property key="boot-write-protect" value="no_write_protect"/>
+        <property key="enable-check-sections" value="false"/>
+        <property key="enable-data-init" value="true"/>
+        <property key="enable-default-isr" value="true"/>
+        <property key="enable-handles" value="true"/>
+        <property key="enable-pack-data" value="true"/>
+        <property key="extra-lib-directories" value=""/>
+        <property key="fill-flash-options-addr" value=""/>
+        <property key="fill-flash-options-const" value=""/>
+        <property key="fill-flash-options-how" value="0"/>
+        <property key="fill-flash-options-inc-const" value="1"/>
+        <property key="fill-flash-options-increment" value=""/>
+        <property key="fill-flash-options-seq" value=""/>
+        <property key="fill-flash-options-what" value="0"/>
+        <property key="general-code-protect" value="no_code_protect"/>
+        <property key="general-write-protect" value="no_write_protect"/>
+        <property key="generate-cross-reference-file" value="false"/>
+        <property key="heap-size" value=""/>
+        <property key="input-libraries" value=""/>
+        <property key="linker-stack" value="true"/>
+        <property key="linker-symbols" value=""/>
+        <property key="map-file" value="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map"/>
+        <property key="no-ivt" value="false"/>
+        <property key="oXC16ld-extra-opts" value=""/>
+        <property key="oXC16ld-fill-upper" value="0"/>
+        <property key="oXC16ld-force-link" value="false"/>
+        <property key="oXC16ld-no-smart-io" value="false"/>
+        <property key="oXC16ld-nostdlib" value="false"/>
+        <property key="oXC16ld-stackguard" value="16"/>
+        <property key="preprocessor-macros" value=""/>
+        <property key="remove-unused-sections" value="false"/>
+        <property key="report-memory-usage" value="true"/>
+        <property key="secure-eeprom" value="no_eeprom"/>
+        <property key="secure-flash" value="no_flash"/>
+        <property key="secure-ram" value="no_ram"/>
+        <property key="secure-write-protect" value="no_write_protect"/>
+        <property key="stack-size" value="16"/>
+        <property key="symbol-stripping" value=""/>
+        <property key="trace-symbols" value=""/>
+        <property key="warn-section-align" value="false"/>
+      </C30-LD>
+      <C30Global>
+        <property key="common-include-directories" value=""/>
+        <property key="dual-boot-partition" value="0"/>
+        <property key="fast-math" value="false"/>
+        <property key="generic-16-bit" value="false"/>
+        <property key="legacy-libc" value="true"/>
+        <property key="mpreserve-all" value="false"/>
+        <property key="oXC16glb-macros" value=""/>
+        <property key="output-file-format" value="elf"/>
+        <property key="preserve-all" value="false"/>
+        <property key="preserve-file" value=""/>
+        <property key="relaxed-math" value="false"/>
+        <property key="save-temps" value="false"/>
+      </C30Global>
+    </conf>
+  </confs>
+</configurationDescriptor>
diff --git a/HW3.X/nbproject/private/configurations.xml b/Lab2A.X/nbproject/private/configurations.xml
index 7551fab..f0a581b 100644
--- a/HW3.X/nbproject/private/configurations.xml
+++ b/Lab2A.X/nbproject/private/configurations.xml
@@ -1,25 +1,25 @@
-<?xml version="1.0" encoding="UTF-8"?>

-<configurationDescriptor version="65">

-  <projectmakefile>Makefile</projectmakefile>

-  <defaultConf>0</defaultConf>

-  <confs>

-    <conf name="default" type="2">

-      <platformToolSN></platformToolSN>

-      <languageToolchainDir>C:\Program Files\Microchip\xc16\v1.50\bin</languageToolchainDir>

-      <mdbdebugger version="1">

-        <placeholder1>place holder 1</placeholder1>

-        <placeholder2>place holder 2</placeholder2>

-      </mdbdebugger>

-      <runprofile version="6">

-        <args></args>

-        <rundir></rundir>

-        <buildfirst>true</buildfirst>

-        <console-type>0</console-type>

-        <terminal-type>0</terminal-type>

-        <remove-instrumentation>0</remove-instrumentation>

-        <environment>

-        </environment>

-      </runprofile>

-    </conf>

-  </confs>

-</configurationDescriptor>

+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="65">
+  <projectmakefile>Makefile</projectmakefile>
+  <defaultConf>0</defaultConf>
+  <confs>
+    <conf name="default" type="2">
+      <platformToolSN></platformToolSN>
+      <languageToolchainDir>C:\Program Files (x86)\Microchip\xc16\v1.41\bin</languageToolchainDir>
+      <mdbdebugger version="1">
+        <placeholder1>place holder 1</placeholder1>
+        <placeholder2>place holder 2</placeholder2>
+      </mdbdebugger>
+      <runprofile version="6">
+        <args></args>
+        <rundir></rundir>
+        <buildfirst>true</buildfirst>
+        <console-type>0</console-type>
+        <terminal-type>0</terminal-type>
+        <remove-instrumentation>0</remove-instrumentation>
+        <environment>
+        </environment>
+      </runprofile>
+    </conf>
+  </confs>
+</configurationDescriptor>
diff --git a/Lab 2.X/nbproject/private/private.xml b/Lab2A.X/nbproject/private/private.xml
index 284eeec..6807a2b 100644
--- a/Lab 2.X/nbproject/private/private.xml
+++ b/Lab2A.X/nbproject/private/private.xml
@@ -1,7 +1,7 @@
-<?xml version="1.0" encoding="UTF-8"?>

-<project-private xmlns="http://www.netbeans.org/ns/project-private/1">

-    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>

-    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">

-        <group/>

-    </open-files>

-</project-private>

+<?xml version="1.0" encoding="UTF-8"?>
+<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
+    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
+    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
+        <group/>
+    </open-files>
+</project-private>
diff --git a/Lab 2.X/nbproject/project.xml b/Lab2A.X/nbproject/project.xml
index 3d83cc6..07edd7c 100644
--- a/Lab 2.X/nbproject/project.xml
+++ b/Lab2A.X/nbproject/project.xml
@@ -1,29 +1,27 @@
-<?xml version="1.0" encoding="UTF-8"?>

-<project xmlns="http://www.netbeans.org/ns/project/1">

-    <type>com.microchip.mplab.nbide.embedded.makeproject</type>

-    <configuration>

-        <data xmlns="http://www.netbeans.org/ns/make-project/1">

-            <name>Lab_2A</name>

-            <creation-uuid>a04173f8-bbe6-4995-8b6c-22a146ec3d91</creation-uuid>

-            <make-project-type>0</make-project-type>

-            <c-extensions/>

-            <cpp-extensions/>

-            <header-extensions/>

-            <asminc-extensions/>

-            <sourceEncoding>ISO-8859-1</sourceEncoding>

-            <make-dep-projects/>

-            <sourceRootList>

-                <sourceRootElem>.</sourceRootElem>

-            </sourceRootList>

-            <confList>

-                <confElem>

-                    <name>default</name>

-                    <type>2</type>

-                </confElem>

-            </confList>

-            <formatting>

-                <project-formatting-style>false</project-formatting-style>

-            </formatting>

-        </data>

-    </configuration>

-</project>

+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://www.netbeans.org/ns/project/1">
+    <type>com.microchip.mplab.nbide.embedded.makeproject</type>
+    <configuration>
+        <data xmlns="http://www.netbeans.org/ns/make-project/1">
+            <name>Lab 2</name>
+            <creation-uuid>a04173f8-bbe6-4995-8b6c-22a146ec3d91</creation-uuid>
+            <make-project-type>0</make-project-type>
+            <c-extensions/>
+            <cpp-extensions/>
+            <header-extensions/>
+            <asminc-extensions/>
+            <sourceEncoding>ISO-8859-1</sourceEncoding>
+            <make-dep-projects/>
+            <sourceRootList/>
+            <confList>
+                <confElem>
+                    <name>default</name>
+                    <type>2</type>
+                </confElem>
+            </confList>
+            <formatting>
+                <project-formatting-style>false</project-formatting-style>
+            </formatting>
+        </data>
+    </configuration>
+</project>