1 files changed, 0 insertions, 57 deletions
diff --git a/HW3.X/strap012_hw3prob1.c b/HW3.X/strap012_hw3prob1.c
deleted file mode 100644
index dcfd308..0000000
--- a/HW3.X/strap012_hw3prob1.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <xc.h>
-
-// PIC24FJ64GA002 Configuration Bit Settings
-// CW1: FLASH CONFIGURATION WORD 1 (see PIC24 Family Reference Manual 24.1)
-#pragma config ICS = PGx1          // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1)
-#pragma config FWDTEN = OFF        // Watchdog Timer Enable (Watchdog Timer is disabled)
-#pragma config GWRP = OFF          // General Code Segment Write Protect (Writes to program memory are allowed)
-#pragma config GCP = OFF           // General Code Segment Code Protect (Code protection is disabled)
-#pragma config JTAGEN = OFF        // JTAG Port Enable (JTAG port is disabled)
-
-
-// CW2: FLASH CONFIGURATION WORD 2 (see PIC24 Family Reference Manual 24.1)
-#pragma config POSCMOD = NONE           // Primary Oscillator Select (Primary oscillator disabled. 
-					// Primary Oscillator refers to an external osc connected to the OSC1 and OSC2 pins)
-#pragma config I2C1SEL = PRI       // I2C1 Pin Location Select (Use default SCL1/SDA1 pins)
-#pragma config IOL1WAY = OFF       // IOLOCK Protection (IOLOCK may be changed via unlocking seq)
-#pragma config OSCIOFNC = ON       // OSC2/CLKO/RC15 functions as port I/O (RC15)
-#pragma config FCKSM = CSECME      // Clock Switching and Monitor (Clock switching is enabled, 
-                                       // Fail-Safe Clock Monitor is enabled)
-#pragma config FNOSC = FRCPLL      // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL))
-
-volatile unsigned long int msecs = 0;
-
-
-void __attribute__((__interrupt__,__auto_psv__)) _T1Interrupt(void)
-{
-    IFS0bits.T1IF = 0;
-    msecs++;
-}
-
-void setup(void)
-{
-    CLKDIVbits.RCDIV = 0; // make 16MHz
-
-    T1CON = 0;
-    PR1 = 0xFFFF;
-
-    IFS0bits.T1IF = 0;
-    IPC0bits.T1IP = 3;
-
-    /* enable Timer 1 interrupt */
-    //DISABLE IF POLLING
-    IEC0bits.T1IE = 1;
-
-    T1CONbits.TON = 1;
-}
-
-
-int main(void)
-{
-    setup();
-    while (1) {
-        //Polling stuff
-//        while (_T1IF == 0);
-//            _T1IF = 0;
-    }
-}