1 files changed, 0 insertions, 123 deletions
diff --git a/Lab 2.X/Lab2A.s b/Lab 2.X/Lab2A.s
deleted file mode 100644
index fa35d55..0000000
--- a/Lab 2.X/Lab2A.s
+++ /dev/null
@@ -1,123 +0,0 @@
-
-.include "xc.inc"          ; required "boiler-plate" (BP)
-
-;the next two lines set up the actual chip for operation - required
-config __CONFIG2, POSCMOD_EC & I2C1SEL_SEC & IOL1WAY_OFF & OSCIOFNC_ON & FCKSM_CSECME & FNOSC_FRCPLL & SOSCSEL_LPSOSC & WUTSEL_FST & IESO_OFF
-config __CONFIG1, WDTPS_PS1 & FWPSA_PR32 & WINDIS_OFF & FWDTEN_OFF & BKBUG_ON & GWRP_ON & GCP_ON & JTAGEN_OFF
-
-    .bss        ; put the following labels in RAM
-counter:
-    .space 2    ; a variable that takes two bytes (we won?t use
-                ; it for now, but put here to make this a generic
-                ; template to be used later).
-stack:
-    .space  32  ; this will be our stack area, needed for func calls
-
-.text           ; BP (put the following data in ROM(program memory))
-
-;because we are using the C compiler to assemble our code, we need a "_main" label
-;somewhere. (There's a link step that looks for it.)
-.global _main               ;BP
-;your functions go here
-
-_main:
-
-    bclr    CLKDIV,#8                 ;BP
-    nop
-    ;; --- Begin your main program below here ---
-    
-    
-    mov     #0x9fff,w0  
-    mov     w0,AD1PCFG            ; Set all pins to digital mode
-    mov     #0b1111111111111110,w0  
-    mov     w0,TRISA            ; set pin RA0 to output
-    mov     #0x0000,w0  
-    mov     w0,LATA            ; set pin RA0 low
-    call delay_100us
-    call setColor
-    call foreverLoop
-   
-wait_24cycles:
-                     ; 2 cycles for function call
-    repeat #17        ; 1 cycle to load and prep
-    nop              ; 17+1 cycles to execute NOP 18 times
-    return           ; 3 cycles for the return
-    
-wait_32cycles: ; 2
-    repeat #24 ; 1
-    nop	       ; 25+1 cycles = 26
-    return     ; 3
-    
-delay_100us:
-    repeat #1593
-    nop
-    return
-    
-delay_1ms:
-    repeat #15993
-    nop
-    return
-    
-write_bit_stream:
-    call    wait_24cycles     ; 24 cycles
-    clr     LATA              ; set pin RA0 low = 1 cycle
-    call    wait_32cycles     ; 32 cycles
-    inc    LATA               ; set pin RA0 high = 1 cycle
-    return
-
-write_0:      ;2 cycles for function call
-    inc LATA  ;1
-    repeat #3 ;1 for load
-    nop	      ;3+1=4 nop
-    clr LATA  ;1
-    repeat #6 ;1 for load
-    nop       ;1+6=7 nop
-    return    ;3 return
-    
-    
-write_1:      ;2 cycle call
-    inc LATA  ;1
-    repeat #10;1 load
-    nop	      ;1+10=11 nop
-    clr LATA  ;1
-    nop       ;1
-    return    ;3 return
-    
-setColor:
-    ;Set R
-    call write_1
-    call write_1
-    call write_1
-    call write_1
-    call write_1
-    call write_1
-    call write_1
-    call write_1
-    ;Set G
-    call write_1
-    call write_0
-    call write_0
-    call write_1
-    call write_1
-    call write_0
-    call write_1
-    call write_1
-    ;Set B
-    call write_0
-    call write_0
-    call write_0
-    call write_0
-    call write_0
-    call write_0
-    call write_0
-    call write_0
-    
-    return
-    
-foreverLoop:
-;   call write_bit_stream
-    nop
-    bra foreverLoop
-    
-
-.end