From f7dddf06297f415413760f3bedf00f7297e60cf7 Mon Sep 17 00:00:00 2001 From: RossTheRoss Date: Wed, 8 Apr 2020 11:17:47 -0500 Subject: Forget to add a bunch of things oops --- HW3.X/strap012_hw3prob3.c | 77 ----------------------------------------------- 1 file changed, 77 deletions(-) delete mode 100644 HW3.X/strap012_hw3prob3.c (limited to 'HW3.X/strap012_hw3prob3.c') diff --git a/HW3.X/strap012_hw3prob3.c b/HW3.X/strap012_hw3prob3.c deleted file mode 100644 index 6f3b6b2..0000000 --- a/HW3.X/strap012_hw3prob3.c +++ /dev/null @@ -1,77 +0,0 @@ -#include - -// PIC24FJ64GA002 Configuration Bit Settings - -// CONFIG2 -#pragma config POSCMOD = NONE // Primary Oscillator Select (Primary oscillator disabled) -#pragma config I2C1SEL = PRI // I2C1 Pin Location Select (Use default SCL1/SDA1 pins) -#pragma config IOL1WAY = OFF // IOLOCK Protection (IOLOCK may be changed via unlocking seq) -#pragma config OSCIOFNC = OFF // Primary Oscillator Output Function (OSC2/CLKO/RC15 functions as CLKO (FOSC/2)) -#pragma config FCKSM = CSECME // Clock Switching and Monitor (Clock switching is enabled, Fail-Safe Clock Monitor is enabled) -#pragma config FNOSC = FRCPLL // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL)) -#pragma config SOSCSEL = SOSC // Sec Oscillator Select (Default Secondary Oscillator (SOSC)) -#pragma config WUTSEL = LEG // Wake-up timer Select (Legacy Wake-up Timer) -#pragma config IESO = ON // Internal External Switch Over Mode (IESO mode (Two-Speed Start-up) enabled) - -// CONFIG1 -#pragma config WDTPS = PS32768 // Watchdog Timer Postscaler (1:32,768) -#pragma config FWPSA = PR128 // WDT Prescaler (Prescaler ratio of 1:128) -#pragma config WINDIS = ON // Watchdog Timer Window (Standard Watchdog Timer enabled,(Windowed-mode is disabled)) -#pragma config FWDTEN = OFF // Watchdog Timer Enable (Watchdog Timer is disabled) -#pragma config ICS = PGx1 // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1) -#pragma config GWRP = OFF // General Code Segment Write Protect (Writes to program memory are allowed) -#pragma config GCP = OFF // General Code Segment Code Protect (Code protection is disabled) -#pragma config JTAGEN = OFF // JTAG Port Enable (JTAG port is disabled) - -// To test: Window > Simulator > Stimulus. Click on the Pin / Register Actions. -// Click on the top row where it says "Click here to add/remove signals", and add IC1 -// (or RB6). Add entries that change the signal to 1 at time 1000, to zero at 1100, and so on. -// You may want to check the checkbox that says "Repeat from action". - -volatile unsigned int dutyCycle = 0; // positive or negative - -void __attribute__((__interrupt__,__auto_psv__)) _IC1Interrupt(void) -{ - static unsigned int last = 0; - unsigned int current; - _IC1IF = 0; - - current = IC1BUF; - if (current > last) - dutyCycle = current - last; - else -// dutyCycle = ((long)(1<<16) + current) - last; - dutyCycle = ((long)(PR3+1) + current) - last; - - last = current; -} - -void setup() -{ - CLKDIVbits.RCDIV = 0; - AD1PCFG = 0x9fff; // For digital I/O. If you want to use analog, you'll - // need to change this. - _TRISB6 = 1; - __builtin_write_OSCCONL(OSCCON & 0xbf); // unlock PPS - _IC1R = 6 ; //IC! <- RB6; See Table 10-2 on P108 of the datasheet - __builtin_write_OSCCONL(OSCCON | 0x40); // lock PPS - - T3CON = 0; - PR3 = 65535; - TMR3 = 0; - _T3IF = 0; - T3CON = 0x8000; - - IC1CON = 1; // every edge - _IC1IF = 0; - _IC1IE = 1; -} - -int main(void) -{ - setup(); - - while (1){ - - } -} -- cgit v1.2.3