From 40e6fa2722fa3c37edbc0d0faa5a1164c7a68e34 Mon Sep 17 00:00:00 2001
From: RossTheRoss <msattr@gmail.com>
Date: Sat, 22 Feb 2020 19:58:57 -0600
Subject: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
 (Lab 3 partially working)

---
 Lab3.X/lab3_c.c | 108 --------------------------------------------------------
 1 file changed, 108 deletions(-)
 delete mode 100644 Lab3.X/lab3_c.c

(limited to 'Lab3.X/lab3_c.c')

diff --git a/Lab3.X/lab3_c.c b/Lab3.X/lab3_c.c
deleted file mode 100644
index 5050d50..0000000
--- a/Lab3.X/lab3_c.c
+++ /dev/null
@@ -1,108 +0,0 @@
-#include "xc.h"
-// CW1: FLASH CONFIGURATION WORD 1 (see PIC24 Family Reference Manual 24.1)
-#pragma config ICS = PGx1          // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1)
-#pragma config FWDTEN = OFF        // Watchdog Timer Enable (Watchdog Timer is disabled)
-#pragma config GWRP = OFF          // General Code Segment Write Protect (Writes to program memory are allowed)
-#pragma config GCP = OFF           // General Code Segment Code Protect (Code protection is disabled)
-#pragma config JTAGEN = OFF        // JTAG Port Enable (JTAG port is disabled)
-
-
-// CW2: FLASH CONFIGURATION WORD 2 (see PIC24 Family Reference Manual 24.1)
-#pragma config I2C1SEL = PRI       // I2C1 Pin Location Select (Use default SCL1/SDA1 pins)
-#pragma config IOL1WAY = OFF       // IOLOCK Protection (IOLOCK may be changed via unlocking seq)
-#pragma config OSCIOFNC = ON       // Primary Oscillator I/O Function (CLKO/RC15 functions as I/O pin)
-#pragma config FCKSM = CSECME      // Clock Switching and Monitor (Clock switching is enabled, 
-                                       // Fail-Safe Clock Monitor is enabled)
-#pragma config FNOSC = FRCPLL      // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL))
-
-void init7seg(void);
-void showChar7seg(char myChar, int myDigit);
-//where myChar is the character being displayed
-//where myDigit indicates LEFT (1) or RIGHT (0)
-
-
-void setup(void) {
-    CLKDIVbits.RCDIV = 0;  //Set RCDIV=1:1 (default 2:1) 32MHz or FCY/2=16M
-    init7seg();
-}
-
-void init7seg(void) {
-    AD1PCFG = 0x9fff;            //sets all pins to digital I/O
-    TRISA = 0b0000000000011111;  //set port A to inputs, 
-    TRISB = 0b0000000000000011;  //and port B to outputs
-    LATA = 0x0000;               //Set all of port A to LOW
-    LATB = 0xF000;               //and all of port B to LOW
-}
-
-int main(void) {
-    setup();
-    LATB |= (0b01 << 10);
-    LATB ^= (0b001111111);
-    while (1) {
-        
-    }
-}
-
-void showChar7seg(char myChar, int myDigit) {
-    LATB |= 0xFF;
-    switch (myChar) {
-        case '0':
-            LATB ^= (0b11 << 2);
-            break;
-        case '1':
-            LATB ^= (0b11 << 6);
-            break;
-        case '2':
-            //
-            break;
-        case '3':
-            //
-            break;
-        case '4':
-            //
-            break;
-        case '5':
-            //
-            break;
-        case '6':
-            //
-            break;
-        case '7':
-            LATB ^= (0b001111110);
-            break;
-        case '8':
-            //
-            break;
-        case '9':
-            //
-            break;
-        case 'A':
-            //
-            break;
-        case 'b':
-            //
-            break;
-        case 'C':
-            //
-            break;
-        case 'd':
-            //
-            break;
-        case 'E':
-            //
-            break;
-        case 'F':
-            //
-            break;
-        default:
-            break;
-    }   //END OF SWITCH
-    if (myDigit == 0) {
-        //0 = left
-        LATB ^= (0b10 << 10);
-    } else if (myDigit == 1) {
-        //0 = right
-        LATB ^= (0b01 << 10);
-    }
-    
-}
\ No newline at end of file
-- 
cgit v1.2.3