Forget to add a bunch of things

oops

1 files changed, 0 insertions, 57 deletions

diff --git a/HW3.X/strap012_hw3prob1.c b/HW3.X/strap012_hw3prob1.c
deleted file mode 100644
index dcfd308..0000000
--- a/HW3.X/strap012_hw3prob1.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <xc.h>

-

-// PIC24FJ64GA002 Configuration Bit Settings

-// CW1: FLASH CONFIGURATION WORD 1 (see PIC24 Family Reference Manual 24.1)

-#pragma config ICS = PGx1          // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1)

-#pragma config FWDTEN = OFF        // Watchdog Timer Enable (Watchdog Timer is disabled)

-#pragma config GWRP = OFF          // General Code Segment Write Protect (Writes to program memory are allowed)

-#pragma config GCP = OFF           // General Code Segment Code Protect (Code protection is disabled)

-#pragma config JTAGEN = OFF        // JTAG Port Enable (JTAG port is disabled)

-

-

-// CW2: FLASH CONFIGURATION WORD 2 (see PIC24 Family Reference Manual 24.1)

-#pragma config POSCMOD = NONE           // Primary Oscillator Select (Primary oscillator disabled. 

-					// Primary Oscillator refers to an external osc connected to the OSC1 and OSC2 pins)

-#pragma config I2C1SEL = PRI       // I2C1 Pin Location Select (Use default SCL1/SDA1 pins)

-#pragma config IOL1WAY = OFF       // IOLOCK Protection (IOLOCK may be changed via unlocking seq)

-#pragma config OSCIOFNC = ON       // OSC2/CLKO/RC15 functions as port I/O (RC15)

-#pragma config FCKSM = CSECME      // Clock Switching and Monitor (Clock switching is enabled, 

-                                       // Fail-Safe Clock Monitor is enabled)

-#pragma config FNOSC = FRCPLL      // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL))

-

-volatile unsigned long int msecs = 0;

-

-

-void __attribute__((__interrupt__,__auto_psv__)) _T1Interrupt(void)

-{

-    IFS0bits.T1IF = 0;

-    msecs++;

-}

-

-void setup(void)

-{

-    CLKDIVbits.RCDIV = 0; // make 16MHz

-

-    T1CON = 0;

-    PR1 = 0xFFFF;

-

-    IFS0bits.T1IF = 0;

-    IPC0bits.T1IP = 3;

-

-    /* enable Timer 1 interrupt */

-    //DISABLE IF POLLING

-    IEC0bits.T1IE = 1;

-

-    T1CONbits.TON = 1;

-}

-

-

-int main(void)

-{

-    setup();

-    while (1) {

-        //Polling stuff

-//        while (_T1IF == 0);

-//            _T1IF = 0;

-    }

-}