Forget to add a bunch of things

oops

1 files changed, 63 insertions, 0 deletions

diff --git a/Lab3.X/lab3_main.c b/Lab3.X/lab3_main.c
new file mode 100644
index 0000000..051b2c1
--- /dev/null
+++ b/Lab3.X/lab3_main.c
@@ -0,0 +1,63 @@
+#include "xc.h"
+#include "numpad.h"
+#include "display.h"
+
+// CW1: FLASH CONFIGURATION WORD 1 (see PIC24 Family Reference Manual 24.1)
+#pragma config ICS = PGx1          // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1)
+#pragma config FWDTEN = OFF        // Watchdog Timer Enable (Watchdog Timer is disabled)
+#pragma config GWRP = OFF          // General Code Segment Write Protect (Writes to program memory are allowed)
+#pragma config GCP = OFF           // General Code Segment Code Protect (Code protection is disabled)
+#pragma config JTAGEN = OFF        // JTAG Port Enable (JTAG port is disabled)
+
+
+// CW2: FLASH CONFIGURATION WORD 2 (see PIC24 Family Reference Manual 24.1)
+#pragma config I2C1SEL = PRI       // I2C1 Pin Location Select (Use default SCL1/SDA1 pins)
+#pragma config IOL1WAY = OFF       // IOLOCK Protection (IOLOCK may be changed via unlocking seq)
+#pragma config OSCIOFNC = ON       // Primary Oscillator I/O Function (CLKO/RC15 functions as I/O pin)
+#pragma config FCKSM = CSECME      // Clock Switching and Monitor (Clock switching is enabled, 
+// Fail-Safe Clock Monitor is enabled)
+#pragma config FNOSC = FRCPLL      // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL))
+
+#define NOKEY 255
+
+void delay(long d) {
+    for (d=d; d > 0; d--) {
+        asm("nop");
+    }
+}
+
+
+
+//============================================================================//
+
+int main(void) {
+    init7seg();
+    initKeyPad();
+    char key='N';
+    char right, left;
+    int debounce=250;
+    //RB<9:2> will drive the cathodes of the seven-segment display
+    //RB<11:10> will drive the right and left anodes respectively
+    //RA<3:0> will drive inputs of keypad
+    //RB<15:12> will cycle to sense RA inputs
+    while(1)
+    {
+        if (debounce==0)
+        {
+            key=cycle();
+            if (key!='N')
+            {
+                left=right;
+                right=key;
+            }
+            debounce=250;
+        }
+        showChar7seg(right,0);
+        delay(500);
+        showChar7seg(left,1);
+        delay(200);
+        debounce--;
+        while (!IFS0bits.T1IF) ;    
+        IFS0bits.T1IF = 0;
+    }
+}
\ No newline at end of file