Forget to add a bunch of things

oops

7 files changed, 0 insertions, 521 deletions

diff --git a/Lab_2B.X/Makefile b/Lab_2B.X/Makefile
deleted file mode 100644
index fca8e2c..0000000
--- a/Lab_2B.X/Makefile
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-#  There exist several targets which are by default empty and which can be 
-#  used for execution of your targets. These targets are usually executed 
-#  before and after some main targets. They are: 
-#
-#     .build-pre:              called before 'build' target
-#     .build-post:             called after 'build' target
-#     .clean-pre:              called before 'clean' target
-#     .clean-post:             called after 'clean' target
-#     .clobber-pre:            called before 'clobber' target
-#     .clobber-post:           called after 'clobber' target
-#     .all-pre:                called before 'all' target
-#     .all-post:               called after 'all' target
-#     .help-pre:               called before 'help' target
-#     .help-post:              called after 'help' target
-#
-#  Targets beginning with '.' are not intended to be called on their own.
-#
-#  Main targets can be executed directly, and they are:
-#  
-#     build                    build a specific configuration
-#     clean                    remove built files from a configuration
-#     clobber                  remove all built files
-#     all                      build all configurations
-#     help                     print help mesage
-#  
-#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
-#  .help-impl are implemented in nbproject/makefile-impl.mk.
-#
-#  Available make variables:
-#
-#     CND_BASEDIR                base directory for relative paths
-#     CND_DISTDIR                default top distribution directory (build artifacts)
-#     CND_BUILDDIR               default top build directory (object files, ...)
-#     CONF                       name of current configuration
-#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
-#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
-#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
-#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
-#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
-#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
-#
-# NOCDDL
-
-
-# Environment 
-MKDIR=mkdir
-CP=cp
-CCADMIN=CCadmin
-RANLIB=ranlib
-
-
-# build
-build: .build-post
-
-.build-pre:
-# Add your pre 'build' code here...
-
-.build-post: .build-impl
-# Add your post 'build' code here...
-
-
-# clean
-clean: .clean-post
-
-.clean-pre:
-# Add your pre 'clean' code here...
-# WARNING: the IDE does not call this target since it takes a long time to
-# simply run make. Instead, the IDE removes the configuration directories
-# under build and dist directly without calling make.
-# This target is left here so people can do a clean when running a clean
-# outside the IDE.
-
-.clean-post: .clean-impl
-# Add your post 'clean' code here...
-
-
-# clobber
-clobber: .clobber-post
-
-.clobber-pre:
-# Add your pre 'clobber' code here...
-
-.clobber-post: .clobber-impl
-# Add your post 'clobber' code here...
-
-
-# all
-all: .all-post
-
-.all-pre:
-# Add your pre 'all' code here...
-
-.all-post: .all-impl
-# Add your post 'all' code here...
-
-
-# help
-help: .help-post
-
-.help-pre:
-# Add your pre 'help' code here...
-
-.help-post: .help-impl
-# Add your post 'help' code here...
-
-
-
-# include project implementation makefile
-include nbproject/Makefile-impl.mk
-
-# include project make variables
-include nbproject/Makefile-variables.mk
diff --git a/Lab_2B.X/lab2b_asm.s b/Lab_2B.X/lab2b_asm.s
deleted file mode 100644
index ddee29b..0000000
--- a/Lab_2B.X/lab2b_asm.s
+++ /dev/null
@@ -1,40 +0,0 @@
-.include "xc.inc"

-

-.text                       ;BP (put the following data in ROM(program memory))

-

-; This is a library, thus it can *not* contain a _main function: the C file will

-; define main().  However, we

-; we will need a .global statement to make available ASM functions to C code.

-; All functions utilized outside of this file will need to have a leading 

-; underscore (_) and be included in a comment delimited list below.

-.global _write_0, _write_1, _wait_100us, _wait_1ms

-    

-_wait_100us:

-    repeat #1593

-    nop

-    return

-    

-_wait_1ms:

-    repeat #15993

-    nop

-    return

- 

-_write_0:     ;2 cycles for function call

-    inc LATA  ;1

-    repeat #2 ;1 for load

-    nop	      ;2+1=3 nop

-    clr LATA  ;1

-    repeat #6 ;1 for load

-    nop       ;1+6=7 nop

-    return    ;3 return

-    

-    

-_write_1:     ;2 cycle call

-    inc LATA  ;1

-    repeat #8 ;1 load

-    nop	      ;1+9=10 nop

-    clr LATA  ;1

-    nop	      ;1

-    nop	      ;1

-    return    ;3 return

-    
\ No newline at end of file
diff --git a/Lab_2B.X/nbproject/Makefile-default.mk b/Lab_2B.X/nbproject/Makefile-default.mk
deleted file mode 100644
index 5ab6334..0000000
--- a/Lab_2B.X/nbproject/Makefile-default.mk
+++ /dev/null
@@ -1,175 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a -pre and a -post target defined where you can add customized code.
-#
-# This makefile implements configuration specific macros and targets.
-
-
-# Include project Makefile
-ifeq "${IGNORE_LOCAL}" "TRUE"
-# do not include local makefile. User is passing all local related variables already
-else
-include Makefile
-# Include makefile containing local settings
-ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
-include nbproject/Makefile-local-default.mk
-endif
-endif
-
-# Environment
-MKDIR=gnumkdir -p
-RM=rm -f 
-MV=mv 
-CP=cp 
-
-# Macros
-CND_CONF=default
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-IMAGE_TYPE=debug
-OUTPUT_SUFFIX=elf
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-else
-IMAGE_TYPE=production
-OUTPUT_SUFFIX=hex
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-endif
-
-ifeq ($(COMPARE_BUILD), true)
-COMPARISON_BUILD=-mafrlcsj
-else
-COMPARISON_BUILD=
-endif
-
-ifdef SUB_IMAGE_ADDRESS
-SUB_IMAGE_ADDRESS_COMMAND=--image-address $(SUB_IMAGE_ADDRESS)
-else
-SUB_IMAGE_ADDRESS_COMMAND=
-endif
-
-# Object Directory
-OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
-
-# Distribution Directory
-DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
-
-# Source Files Quoted if spaced
-SOURCEFILES_QUOTED_IF_SPACED=lab2b_asm.s lab2b_c.c
-
-# Object Files Quoted if spaced
-OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/lab2b_asm.o ${OBJECTDIR}/lab2b_c.o
-POSSIBLE_DEPFILES=${OBJECTDIR}/lab2b_asm.o.d ${OBJECTDIR}/lab2b_c.o.d
-
-# Object Files
-OBJECTFILES=${OBJECTDIR}/lab2b_asm.o ${OBJECTDIR}/lab2b_c.o
-
-# Source Files
-SOURCEFILES=lab2b_asm.s lab2b_c.c
-
-
-
-CFLAGS=
-ASFLAGS=
-LDLIBSOPTIONS=
-
-############# Tool locations ##########################################
-# If you copy a project from one host to another, the path where the  #
-# compiler is installed may be different.                             #
-# If you open this project with MPLAB X in the new host, this         #
-# makefile will be regenerated and the paths will be corrected.       #
-#######################################################################
-# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
-FIXDEPS=fixDeps
-
-.build-conf:  ${BUILD_SUBPROJECTS}
-ifneq ($(INFORMATION_MESSAGE), )
-	@echo $(INFORMATION_MESSAGE)
-endif
-	${MAKE}  -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-
-MP_PROCESSOR_OPTION=24FJ64GA002
-MP_LINKER_FILE_OPTION=,--script=p24FJ64GA002.gld
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: compile
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${OBJECTDIR}/lab2b_c.o: lab2b_c.c  nbproject/Makefile-${CND_CONF}.mk
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/lab2b_c.o.d 
-	@${RM} ${OBJECTDIR}/lab2b_c.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  lab2b_c.c  -o ${OBJECTDIR}/lab2b_c.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MMD -MF "${OBJECTDIR}/lab2b_c.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)  -legacy-libc  $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp=${DFP_DIR}/xc16
-	@${FIXDEPS} "${OBJECTDIR}/lab2b_c.o.d" $(SILENT)  -rsi ${MP_CC_DIR}../ 
-	
-else
-${OBJECTDIR}/lab2b_c.o: lab2b_c.c  nbproject/Makefile-${CND_CONF}.mk
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/lab2b_c.o.d 
-	@${RM} ${OBJECTDIR}/lab2b_c.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  lab2b_c.c  -o ${OBJECTDIR}/lab2b_c.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MMD -MF "${OBJECTDIR}/lab2b_c.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)  -legacy-libc  $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp=${DFP_DIR}/xc16
-	@${FIXDEPS} "${OBJECTDIR}/lab2b_c.o.d" $(SILENT)  -rsi ${MP_CC_DIR}../ 
-	
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemble
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${OBJECTDIR}/lab2b_asm.o: lab2b_asm.s  nbproject/Makefile-${CND_CONF}.mk
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/lab2b_asm.o.d 
-	@${RM} ${OBJECTDIR}/lab2b_asm.o 
-	${MP_CC} $(MP_EXTRA_AS_PRE)  lab2b_asm.s  -o ${OBJECTDIR}/lab2b_asm.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -omf=elf -DXPRJ_default=$(CND_CONF)  -legacy-libc  -Wa,-MD,"${OBJECTDIR}/lab2b_asm.o.d",--defsym=__MPLAB_BUILD=1,--defsym=__ICD2RAM=1,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1,--defsym=__MPLAB_DEBUGGER_PK3=1,-g,--no-relax$(MP_EXTRA_AS_POST)  -mdfp=${DFP_DIR}/xc16
-	@${FIXDEPS} "${OBJECTDIR}/lab2b_asm.o.d"  $(SILENT)  -rsi ${MP_CC_DIR}../  
-	
-else
-${OBJECTDIR}/lab2b_asm.o: lab2b_asm.s  nbproject/Makefile-${CND_CONF}.mk
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/lab2b_asm.o.d 
-	@${RM} ${OBJECTDIR}/lab2b_asm.o 
-	${MP_CC} $(MP_EXTRA_AS_PRE)  lab2b_asm.s  -o ${OBJECTDIR}/lab2b_asm.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -omf=elf -DXPRJ_default=$(CND_CONF)  -legacy-libc  -Wa,-MD,"${OBJECTDIR}/lab2b_asm.o.d",--defsym=__MPLAB_BUILD=1,-g,--no-relax$(MP_EXTRA_AS_POST)  -mdfp=${DFP_DIR}/xc16
-	@${FIXDEPS} "${OBJECTDIR}/lab2b_asm.o.d"  $(SILENT)  -rsi ${MP_CC_DIR}../  
-	
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemblePreproc
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: link
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
-	@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -D__DEBUG=__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -omf=elf -DXPRJ_default=$(CND_CONF)  -legacy-libc  $(COMPARISON_BUILD)   -mreserve=data@0x800:0x81F -mreserve=data@0x820:0x821 -mreserve=data@0x822:0x823 -mreserve=data@0x824:0x825 -mreserve=data@0x826:0x84F   -Wl,,,--defsym=__MPLAB_BUILD=1,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1,-D__DEBUG=__DEBUG,--defsym=__MPLAB_DEBUGGER_PK3=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml$(MP_EXTRA_LD_POST)  -mdfp=${DFP_DIR}/xc16 
-	
-else
-dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
-	@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -omf=elf -DXPRJ_default=$(CND_CONF)  -legacy-libc  $(COMPARISON_BUILD)  -Wl,,,--defsym=__MPLAB_BUILD=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml$(MP_EXTRA_LD_POST)  -mdfp=${DFP_DIR}/xc16 
-	${MP_CC_DIR}\\xc16-bin2hex dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -a  -omf=elf   -mdfp=${DFP_DIR}/xc16 
-	
-endif
-
-
-# Subprojects
-.build-subprojects:
-
-
-# Subprojects
-.clean-subprojects:
-
-# Clean Targets
-.clean-conf: ${CLEAN_SUBPROJECTS}
-	${RM} -r build/default
-	${RM} -r dist/default
-
-# Enable dependency checking
-.dep.inc: .depcheck-impl
-
-DEPFILES=$(shell mplabwildcard ${POSSIBLE_DEPFILES})
-ifneq (${DEPFILES},)
-include ${DEPFILES}
-endif
diff --git a/Lab_2B.X/nbproject/Makefile-impl.mk b/Lab_2B.X/nbproject/Makefile-impl.mk
deleted file mode 100644
index d19ad88..0000000
--- a/Lab_2B.X/nbproject/Makefile-impl.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a pre- and a post- target defined where you can add customization code.
-#
-# This makefile implements macros and targets common to all configurations.
-#
-# NOCDDL
-
-
-# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
-# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
-# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
-# and .clean-reqprojects-conf unless SUB has the value 'no'
-SUB_no=NO
-SUBPROJECTS=${SUB_${SUB}}
-BUILD_SUBPROJECTS_=.build-subprojects
-BUILD_SUBPROJECTS_NO=
-BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
-CLEAN_SUBPROJECTS_=.clean-subprojects
-CLEAN_SUBPROJECTS_NO=
-CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
-
-
-# Project Name
-PROJECTNAME=Lab_2B.X
-
-# Active Configuration
-DEFAULTCONF=default
-CONF=${DEFAULTCONF}
-
-# All Configurations
-ALLCONFS=default 
-
-
-# build
-.build-impl: .build-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
-
-
-# clean
-.clean-impl: .clean-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
-
-# clobber
-.clobber-impl: .clobber-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
-
-
-
-# all
-.all-impl: .all-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
-
-
-
-# dependency checking support
-.depcheck-impl:
-#	@echo "# This code depends on make tool being used" >.dep.inc
-#	@if [ -n "${MAKE_VERSION}" ]; then \
-#	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
-#	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
-#	    echo "include \$${DEPFILES}" >>.dep.inc; \
-#	    echo "endif" >>.dep.inc; \
-#	else \
-#	    echo ".KEEP_STATE:" >>.dep.inc; \
-#	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
-#	fi
diff --git a/Lab_2B.X/nbproject/Makefile-local-default.mk b/Lab_2B.X/nbproject/Makefile-local-default.mk
deleted file mode 100644
index 214e7fa..0000000
--- a/Lab_2B.X/nbproject/Makefile-local-default.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-#
-# This file contains information about the location of compilers and other tools.
-# If you commmit this file into your revision control server, you will be able to 
-# to checkout the project and build it from the command line with make. However,
-# if more than one person works on the same project, then this file might show
-# conflicts since different users are bound to have compilers in different places.
-# In that case you might choose to not commit this file and let MPLAB X recreate this file
-# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
-# least once so the file gets created and the project can be built. Finally, you can also
-# avoid using this file at all if you are only building from the command line with make.
-# You can invoke make with the values of the macros:
-# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...  
-#
-SHELL=cmd.exe
-PATH_TO_IDE_BIN=C:/Program Files (x86)/Microchip/MPLABX/v5.30/mplab_platform/platform/../mplab_ide/modules/../../bin/
-# Adding MPLAB X bin directory to path.
-PATH:=C:/Program Files (x86)/Microchip/MPLABX/v5.30/mplab_platform/platform/../mplab_ide/modules/../../bin/:$(PATH)
-# Path to java used to run MPLAB X when this makefile was created
-MP_JAVA_PATH="C:\Program Files (x86)\Microchip\MPLABX\v5.30\sys\java\jre1.8.0_181/bin/"
-OS_CURRENT="$(shell uname -s)"
-MP_CC="C:\Program Files (x86)\Microchip\xc16\v1.41\bin\xc16-gcc.exe"
-# MP_CPPC is not defined
-# MP_BC is not defined
-MP_AS="C:\Program Files (x86)\Microchip\xc16\v1.41\bin\xc16-as.exe"
-MP_LD="C:\Program Files (x86)\Microchip\xc16\v1.41\bin\xc16-ld.exe"
-MP_AR="C:\Program Files (x86)\Microchip\xc16\v1.41\bin\xc16-ar.exe"
-DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files (x86)/Microchip/MPLABX/v5.30/mplab_platform/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
-MP_CC_DIR="C:\Program Files (x86)\Microchip\xc16\v1.41\bin"
-# MP_CPPC_DIR is not defined
-# MP_BC_DIR is not defined
-MP_AS_DIR="C:\Program Files (x86)\Microchip\xc16\v1.41\bin"
-MP_LD_DIR="C:\Program Files (x86)\Microchip\xc16\v1.41\bin"
-MP_AR_DIR="C:\Program Files (x86)\Microchip\xc16\v1.41\bin"
-# MP_BC_DIR is not defined
-DFP_DIR="C:/Program Files (x86)/Microchip/MPLABX/v5.30/packs/Microchip/PIC24F-GA-GB_DFP/1.1.74"
diff --git a/Lab_2B.X/nbproject/Makefile-variables.mk b/Lab_2B.X/nbproject/Makefile-variables.mk
deleted file mode 100644
index 739f16b..0000000
--- a/Lab_2B.X/nbproject/Makefile-variables.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Generated - do not edit!
-#
-# NOCDDL
-#
-CND_BASEDIR=`pwd`
-# default configuration
-CND_ARTIFACT_DIR_default=dist/default/production
-CND_ARTIFACT_NAME_default=Lab_2B.X.production.hex
-CND_ARTIFACT_PATH_default=dist/default/production/Lab_2B.X.production.hex
-CND_PACKAGE_DIR_default=${CND_DISTDIR}/default/package
-CND_PACKAGE_NAME_default=lab2b.x.tar
-CND_PACKAGE_PATH_default=${CND_DISTDIR}/default/package/lab2b.x.tar
diff --git a/Lab_2B.X/nbproject/Package-default.bash b/Lab_2B.X/nbproject/Package-default.bash
deleted file mode 100644
index c137317..0000000
--- a/Lab_2B.X/nbproject/Package-default.bash
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/bash -x
-
-#
-# Generated - do not edit!
-#
-
-# Macros
-TOP=`pwd`
-CND_CONF=default
-CND_DISTDIR=dist
-TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
-TMPDIRNAME=tmp-packaging
-OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-OUTPUT_BASENAME=Lab_2B.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-PACKAGE_TOP_DIR=lab2b.x/
-
-# Functions
-function checkReturnCode
-{
-    rc=$?
-    if [ $rc != 0 ]
-    then
-        exit $rc
-    fi
-}
-function makeDirectory
-# $1 directory path
-# $2 permission (optional)
-{
-    mkdir -p "$1"
-    checkReturnCode
-    if [ "$2" != "" ]
-    then
-      chmod $2 "$1"
-      checkReturnCode
-    fi
-}
-function copyFileToTmpDir
-# $1 from-file path
-# $2 to-file path
-# $3 permission
-{
-    cp "$1" "$2"
-    checkReturnCode
-    if [ "$3" != "" ]
-    then
-        chmod $3 "$2"
-        checkReturnCode
-    fi
-}
-
-# Setup
-cd "${TOP}"
-mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
-rm -rf ${TMPDIR}
-mkdir -p ${TMPDIR}
-
-# Copy files and create directories and links
-cd "${TOP}"
-makeDirectory ${TMPDIR}/lab2b.x/bin
-copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
-
-
-# Generate tar file
-cd "${TOP}"
-rm -f ${CND_DISTDIR}/${CND_CONF}/package/lab2b.x.tar
-cd ${TMPDIR}
-tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/lab2b.x.tar *
-checkReturnCode
-
-# Cleanup
-cd "${TOP}"
-rm -rf ${TMPDIR}