2 files changed, 0 insertions, 96 deletions
diff --git a/Disc02.X/disc02C.c b/Disc02.X/disc02C.c
deleted file mode 100644
index 442852f..0000000
--- a/Disc02.X/disc02C.c
+++ /dev/null
@@ -1,56 +0,0 @@
-#include <p24Fxxxx.h>
-#include <xc.h>
-
-// PIC24FJ64GA002 Configuration Bit Settings
-// CW1: FLASH CONFIGURATION WORD 1 (see PIC24 Family Reference Manual 24.1)
-#pragma config ICS = PGx1          // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1)
-#pragma config FWDTEN = OFF        // Watchdog Timer Enable (Watchdog Timer is disabled)
-#pragma config GWRP = OFF          // General Code Segment Write Protect (Writes to program memory are allowed)
-#pragma config GCP = OFF           // General Code Segment Code Protect (Code protection is disabled)
-#pragma config JTAGEN = OFF        // JTAG Port Enable (JTAG port is disabled)
-
-
-// CW2: FLASH CONFIGURATION WORD 2 (see PIC24 Family Reference Manual 24.1)
-#pragma config POSCMOD = NONE           // Primary Oscillator Select (Primary oscillator disabled. 
-					// Primary Oscillator refers to an external osc connected to the OSC1 and OSC2 pins)
-#pragma config I2C1SEL = PRI       // I2C1 Pin Location Select (Use default SCL1/SDA1 pins)
-#pragma config IOL1WAY = OFF       // IOLOCK Protection (IOLOCK may be changed via unlocking seq)
-#pragma config OSCIOFNC = ON       // OSC2/CLKO/RC15 functions as port I/O (RC15)
-#pragma config FCKSM = CSECME      // Clock Switching and Monitor (Clock switching is enabled, 
-                                       // Fail-Safe Clock Monitor is enabled)
-#pragma config FNOSC = FRCPLL      // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL))
-
-void myAsmFunc(int iterations);
-
-int myGlobalVar;
-extern int counter;
-
-void setup(void) {
-    CLKDIVbits.RCDIV = 0;
-
-    AD1PCFG = 0x9fff; // all digital
-    TRISB = 3;
-    LATB = 0;
-}
-
-int main(void) {
-    int aS=-1, bS=-2;
-    unsigned int aU = 65535, bU=65534;
-    int dummy = 1;
-    
-    setup();
-    
-    myGlobalVar = 4;
-    counter = 5;
-    
-    myAsmFunc(3);
-    
-    if (aS < bS)
-        ++dummy;
-    
-    if (aU < bU)
-        ++dummy;
-
-    while (1) {
-    }
-}
diff --git a/Disc02.X/disc02asm.s b/Disc02.X/disc02asm.s
deleted file mode 100644
index c718500..0000000
--- a/Disc02.X/disc02asm.s
+++ /dev/null
@@ -1,40 +0,0 @@
-        .equ __P24FJ64GA002,1        ;required "boiler-plate" (BP)
-        .include "p24Fxxxx.inc"      ;BP
-
-#include "xc.inc"                    ;BP
-	; DO NOT include config statements. We define them in the C file
-        ;the next two lines set up the actual chip for operation - required
-        ;config __CONFIG2, POSCMOD_NONE & I2C1SEL_PRI & IOL1WAY_OFF & OSCIOFNC_ON & FCKSM_CSECME & FNOSC_FRCPLL & SOSCSEL_LPSOSC & WUTSEL_FST & IESO_OFF
-        ;config __CONFIG1, FWDTEN_OFF & COE_OFF & BKBUG_OFF & GWRP_OFF & GCP_OFF & JTAGEN_OFF
-
-    .bss                        ;put the following labels in RAM
-_counter:  .space  2          ;declare a 16-bit variable
-; you SHOULD NOT define stack, becasue this file is compiled 
-; alongside a C file that contains main(). The C compiler
-; will create stack space for us.
-;stack:
-;    .space  32                  ;this will be our stack area, from var_16_bit to here
-    .text                       ;BP (put the following data in ROM(program memory))
-    .global _myAsmFunc
-    .global _myGlobalVar
-    .global _counter
-
-_myAsmFunc:
-    push    w0
-    
-    inc	    _myGlobalVar
-    inc	    _counter
-    
-    bra	    checkLoopEndCond
-loopBody:
-    btg    LATB, #2	    ; btg stands for bit-toggle.
-    nop
-    dec	    WREG0
-checkLoopEndCond: 
-    cp0	    w0
-    bra	    nz, loopBody
-
-    pop	    w0
-    return
-    .end
-