Forget to add a bunch of things

oops

1 files changed, 0 insertions, 77 deletions

diff --git a/HW3.X/strap012_hw3prob3.c b/HW3.X/strap012_hw3prob3.c
deleted file mode 100644
index 6f3b6b2..0000000
--- a/HW3.X/strap012_hw3prob3.c
+++ /dev/null
@@ -1,77 +0,0 @@
-#include <xc.h>

-

-// PIC24FJ64GA002 Configuration Bit Settings

-

-// CONFIG2

-#pragma config POSCMOD = NONE           // Primary Oscillator Select (Primary oscillator disabled)

-#pragma config I2C1SEL = PRI            // I2C1 Pin Location Select (Use default SCL1/SDA1 pins)

-#pragma config IOL1WAY = OFF            // IOLOCK Protection (IOLOCK may be changed via unlocking seq)

-#pragma config OSCIOFNC = OFF           // Primary Oscillator Output Function (OSC2/CLKO/RC15 functions as CLKO (FOSC/2))

-#pragma config FCKSM = CSECME           // Clock Switching and Monitor (Clock switching is enabled, Fail-Safe Clock Monitor is enabled)

-#pragma config FNOSC = FRCPLL           // Oscillator Select (Fast RC Oscillator with PLL module (FRCPLL))

-#pragma config SOSCSEL = SOSC           // Sec Oscillator Select (Default Secondary Oscillator (SOSC))

-#pragma config WUTSEL = LEG             // Wake-up timer Select (Legacy Wake-up Timer)

-#pragma config IESO = ON                // Internal External Switch Over Mode (IESO mode (Two-Speed Start-up) enabled)

-

-// CONFIG1

-#pragma config WDTPS = PS32768          // Watchdog Timer Postscaler (1:32,768)

-#pragma config FWPSA = PR128            // WDT Prescaler (Prescaler ratio of 1:128)

-#pragma config WINDIS = ON              // Watchdog Timer Window (Standard Watchdog Timer enabled,(Windowed-mode is disabled))

-#pragma config FWDTEN = OFF             // Watchdog Timer Enable (Watchdog Timer is disabled)

-#pragma config ICS = PGx1               // Comm Channel Select (Emulator EMUC1/EMUD1 pins are shared with PGC1/PGD1)

-#pragma config GWRP = OFF               // General Code Segment Write Protect (Writes to program memory are allowed)

-#pragma config GCP = OFF                // General Code Segment Code Protect (Code protection is disabled)

-#pragma config JTAGEN = OFF             // JTAG Port Enable (JTAG port is disabled)

-

-// To test: Window > Simulator > Stimulus. Click on the Pin / Register Actions.

-// Click on the top row where it says "Click here to add/remove signals", and add IC1

-// (or RB6). Add entries that change the signal to 1 at time 1000, to zero at 1100, and so on.

-// You may want to check the checkbox that says "Repeat from action".

-

-volatile unsigned int dutyCycle = 0;  // positive or negative

-

-void __attribute__((__interrupt__,__auto_psv__)) _IC1Interrupt(void)

-{

-    static unsigned int last = 0;

-    unsigned int current;

-    _IC1IF = 0;

-    

-    current = IC1BUF;

-    if (current > last)

-        dutyCycle = current - last;

-    else

-//        dutyCycle = ((long)(1<<16) + current) - last;

-        dutyCycle = ((long)(PR3+1) + current) - last;

-    

-    last = current;

-}

-

-void setup()

-{

-    CLKDIVbits.RCDIV = 0;

-    AD1PCFG = 0x9fff;  // For digital I/O.  If you want to use analog, you'll

-                       // need to change this.

-    _TRISB6 = 1;

-    __builtin_write_OSCCONL(OSCCON & 0xbf); // unlock PPS

-    _IC1R = 6 ;   //IC! <- RB6; See Table 10-2 on P108 of the datasheet

-    __builtin_write_OSCCONL(OSCCON | 0x40); // lock   PPS

-

-    T3CON = 0;

-    PR3 = 65535;

-    TMR3 = 0;

-    _T3IF = 0;

-    T3CON = 0x8000;

-

-    IC1CON = 1; // every edge

-    _IC1IF = 0;

-    _IC1IE = 1;

-}

-

-int main(void)

-{

-    setup();

-

-    while (1){

- 

-    }

-}